Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/Blank Type-

Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/Blank Type-

Click this image to zoom it.

Move the mouse over the image to zoom

Part Number

Configured Part Number is shown.

 
Part Number
ESJFT8-[125-250/25]-V[3-4.5/0.5]-N[50,​60,​80,​100,​120,​150]
ESJFT12-[150-300/25]-V[5-5.5/0.5]-N[60,​80,​100,​120,​150]
ESJFT15-[200-300/25]-V[6,​8,​9]-N[80,​100,​120,​150]
ESJFT20-[200-300/25]-V[11,​12,​15]-N[80,​100,​120,​150]
ESNFT4-[125,​150]-V[1.5,​2]-P[3,​3.5]-N[50,​60,​80]
ESNFT5-[125,​150]-V[2,​2.5]-P[3.5,​4]-N[50,​60,​80]
ESNFT6-[150-250/25]-V[2,​2.5,​3,​3.5]-P[4,​4.5,​5]-N[60,​80,​100]
ESNFT8-[150-250/25]-V[2.5,​3.5,​4,​4.5]-P[4,​5,​5.5,​6,​6.5]-N[60,​80,​100]
Part NumberVolume DiscountDays to ShipRoHSHead thickness D (Shaft diameter)
(mm)
P (Tip diameter)
(mm)
V (Hole diameter)
(mm)
L (L dimension)
(mm)
N
(mm)
6 Day(s) or more Fully Compliant8mm(JIS)8-3 ~ 4.5125 ~ 25050 ~ 150
6 Day(s) or more Fully Compliant8mm(JIS)12-5 ~ 5.5150 ~ 30060 ~ 150
6 Day(s) or more Fully Compliant8mm(JIS)15-6 ~ 9200 ~ 30080 ~ 150
6 Day(s) or more Fully Compliant8mm(JIS)20-11 ~ 15200 ~ 30080 ~ 150
6 Day(s) or more Fully Compliant4mm(T4)43 ~ 3.51.5 ~ 2125 ~ 15050 ~ 80
6 Day(s) or more Fully Compliant4mm(T4)53.5 ~ 42 ~ 2.5125 ~ 15050 ~ 80
6 Day(s) or more Fully Compliant4mm(T4)64 ~ 52 ~ 3.5150 ~ 25060 ~ 100
6 Day(s) or more Fully Compliant4mm(T4)84 ~ 6.52.5 ~ 4.5150 ~ 25060 ~ 100

Loading...

  1. 1

Basic Information

Product composition Single sleeve Material SKD61 Surface treatment Nitrided
Concentricity ◎0.06 Boring method Reaming Inner dia. tolerance H7
Tapered or not No Shaft diameter tolerance -0.01/-0.02

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Mold
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)