Date Marked Pin Set (PL Exchange Type)

SUS420 J2(S42000)(1.4028)
50~53HRC

■Inside arrow (For single items Click here)

No.	F	T	H	B	ℓ	M×P
4	7.7	1.5	3.0	2.4	2.7	M1.6×0.20
5				2.9
6				3.7
8	9.7	2.0	3.5	5.0	3.2	M2.3×0.25
10	11.7	2.5	4.0	6.3	4.0	M2.5×0.35
12	13.7		4.3	7.5	4.2	M3.0×0.35
16				11.0	4.8	M4.0×0.35
20	15.7	3.5	5.0	13.2	5.3

 

No.	Arrow mark depth (mm)
	Standard	Shallow
4	0.22	0.12
5	0.25	0.14
6	0.40	0.18
8	0.40	0.20
10~20	0.50	0.22

Compared to the standard type, the inside arrow is difficult to turn, so be careful not to scrape the arrow with the tip of a screwdriver. If the inside arrow is scraped, it may not be possible to remove it.
•The inside arrow can be replaced from the PL side (internal side of the die) without removing the plate.


■Outside ring (For single items Click here)

D	Dm6		Dh7		L	E	a	b
4	4	+0.012 +0.004	4	0 -0.012	8	2.8	1.0	1.2
5	5	+0.012 +0.004	5	0 -0.012		2.85
6	6	+0.012 +0.004	6	0 -0.012		2.9
8	8	+0.015 +0.006	8	0 -0.015	10	3.4		1.5
10	10		10		12	4.2
12	12	+0.018 +0.007	12	0 -0.018	14	4.4	1.2
16	16		16			5.0	1.4	1.8
20	20	+0.021 +0.008	20	0 -0.021	16	5.3	1.5	2.0

*Two balls and six grooves are used in D4 and D5.

Specifications

•Dimension Table
■Year/Month Type *Specification Added

Indication		Outside rings divisions	Part Number		Year	Sales period
			Type	D
Year/Month		12 uniform divisions	DTBX DTBXU (Shallow arrow)	4	[ Number ]  *1	For current year Sales Start: Early September of the previous year Sales End: End of March of the following year   For the Following Year Sales Start: Early September of the current year Sales End: End of March of the year after next
				5
				6
				8
				10
				12
				16
				20

*1 You can specify the last two digits of the year for [number]. Example: If you specify "25" for use in 2025, the display mark illustration will be finished accordingly.

■Year Switching Type *Specification Added

Indication		Outside rings divisions	Part Number		Year	Sales period
			Type	D
4 years type		12 uniform divisions	DTX DTXU (Shallow arrow)	4	[ Number ]  *1	For current year - Indicates the current year to 3 years ahead. Sales Start: Early September of the previous year Sales End: End of March of the following year   For the Following Year - Indicates the year after the current year to 3 years ahead. Sales Start: Early September of the current year Sales End: End of March of the year after next
				5
				6
				8
				10
				12
				16
				20
6 years type		12 uniform divisions	DTXS DTXSU (Shallow arrow)	4	[ Number ]  *1	For current year - Indicates the current year to 5 years ahead. Sales Start: Early September of the previous year Sales End: End of March of the following year   For the Following Year - Indicates the year after the current year to 5 years ahead. Sales Start: Early September of the current year Sales End: End of March of the year after next
				5
				6
				8
				10
				12
				16
				20

*1 You can specify the last two digits of the year for [number]. Example: If you specify "25" for use in 2025, the display mark illustration will be finished accordingly.

■Month/Day/No-marking Type *Specification Added

Indication		Outside rings divisions	Part Number
			Type	D
Month		12 uniform divisions	DTDX DTDXU (Shallow arrow)	4
				5
				6
				8
				10
				12
				16
				20
Day (1st digit)		12 uniform divisions	DTEX DTEXU (Shallow arrow)	4
				5
		10 uniform divisions		6
				8
				10
				12
				16
				20
Day (10th digit)		12 uniform divisions	DTFX DTFXU (Shallow arrow)	4
				5
				6
				8
				10
				12
				16
				20
Day		31 uniform divisions	DTGX DTGXU (Shallow arrow)	16
No-marking		12 uniform divisions	DTNX DTNXU (Shallow arrow)	4
				5
				6
				8
				10
				12
				16

■Inside Arrow Character Designation Type

Indication		Outside rings divisions	Part Number		Engraving characters (2 characters/Characters printed in blue in indications)
			Type	D
2 characters/Month		12 uniform divisions	DTMBX	4
				5
				6
				8
				10
				12
				16
Use ¥ for indicating / (slash), # for - (minus) and % for (space).

■Outside Ring Character Designation Type

Indication
1M (1 place)	2M (2 places)	3M (3 places)	4M (4 places)	5M (5 places)	6M (6 places)	10M (10 places)	12M (12 places)
Engraving position	Engraving position	Engraving position	Engraving position	Engraving position Outside ring is divided equally among ten.	Engraving position	Engraving position Outside ring is divided equally among ten.	Engraving position
Up to 3 characters can be designated at each engraving position.			Up to 2 characters can be designated at each engraving position.			Only 1 character can be designated at each engraving position.

 

Part Number			Engraving characters (1~3 characters/Characters printed in blue in indications)
Type	Indication	D	Engraving Position (1)~(12)
DTX	1M 2M 3M 4M 5M* 6M* 10M* 12M	4
		5
		6
		8
		10
		12
		16
*Not applicable to D4 and D5 of 5M, 6M and 10M. Use ¥ for designating / (slash) # for designating - (minus) % for designating (space) ●Dividing of outside rings Click here