Date Marked Pin Set (Outside Rings For Plate-Side Exchange Type)

Brand :

MISUMI

Caution

Product Description

Date Marked Pin Set for Plastic Mold, date marked pin sets are embedded in a cavity or core surface of mold. It's used for engraving number of date, month, year, letter or sign on the injection plastic parts. It can help to reduce cost without having to engrave molds and can be replaced.

SUS420 J2(S42000)(1.4028)

50~53HRC

Dm6		Dh7		dH7		L
3	+0.008 +0.002	3	0 -0.01	1.4	+0.01 0	8
4	+0.012 +0.004	4	0 -0.012	1.9		8
5		5		2.3		8
6		6		2.8		8
8	+0.015 +0.006	8	0 -0.015	4	+0.012 0	10
10	+0.015 +0.006	10	0 -0.015	5	+0.012 0	12
16	+0.018 +0.007	16	0 -0.018	10	+0.015 0	14
20	+0.021 +0.008	20	0 -0.021	12	+0.018 0	16

Outside Rings For Plate-Side Exchange Type:Related Image

Outside rings on this page are adapted for combination with inside arrows of date marked pin sets (

Click here) and products (

Click here).

Specifications

•Dimension Table
■Year Switching Type

Indication	Outside rings divisions	Part Number		Year
		Type	D
4 years type	12 uniform divisions	DT-R	4	19 for 2019~2022 20 for 2020~2023 (Designation possible from Sep.2019) 21 for 2021~2024 (Designation possible from Sep.2020)
			5
			6
			8
			10
			16
			20
6 years type	12 uniform divisions	DTS-R	4	19 for 2019~2024 20 for 2020~2025 (Designation possible from Sep.2019) 21 for 2021~2026 (Designation possible from Sep.2020)
			5
			6
			8
			10
			16

■Month/Day/No-marking Type

Indication	Outside rings divisions	Part Number
		Type	D
Month	12 uniform divisions	DTC-R	3
			4
			5
			6
			8
	12 uniform divisions	DTD-R	4
			5
			6
			8
			10
			16
			20
Day (1st digit)	10 uniform divisions	DTE-R	4
			5
			6
			8
			10
			16
			20
Day (10th digit)	12 uniform divisions	DTF-R	4
			5
			6
			8
			10
			16
			20
Day	31 uniform divisions	DTG-R	16
			20
No-marking	12 uniform divisions	DTN-R	4
			5
			6
			8
			10
			16
			20

■Character Designation Type

Indication
1M (1 place)	2M (2 places)	3M (3 places)	4M (4 places)	5M (5 places)	6M (6 places)	10M (10 places)	12M (12 places)
Engraving position	Engraving position	Engraving position	Engraving position	Engraving position Outside ring is divided equally among ten.	Engraving position	Engraving position Outside ring is divided equally among ten.	Engraving position
Up to 3 characters can be designated at each engraving position.			Up to 2 characters can be designated at each engraving position.			Only 1 character can be designated at each engraving position.

Part Number			Engraving characters (1~3 characters/Characters printed in blue in indications)
Type	Indication	D	Engraving Position (1)~(12)
DT-R	1M 2M 3M 4M 5M* 6M* 10M* 12M	5
		6
		8
		10
		16
		20
*Not applicable to D5 of DT-R5M, DT-R6M. Use ¥ for indicating / (slash), # for - (minus) and % for (space) .

●Dividing of outside rings

1M•2M•3M•4M 6M•12M	12 uniform divisions
5M•10M	10 uniform divisions