Electrodes For Oblique Gate
Brand :
MISUMI
Caution
Product Description
Electrode for submarine gate. The material is tough pitch copper.
EMSG
[ M ]Oxygen free copper（C1020）
| B | D | Part Number | L | A° | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A P | 10° | 15° | 20° | 30° | Type | P | ||||||||
| 1.5 | - | - | 3.7 | - | 6 | EMSG | 1.5 | 60 | 20 | |||||
| 2 | 10.3 | 6.8 | 5.1 | 3.4 | 2 | 60 | 70 | 10 | 15 | 20 | 30 | |||
| 2.5 | 13.1 | 8.7 | 6.5 | 4.3 | 2.5 | |||||||||
| 3 | 16.0 | 10.6 | 7.9 | 5.2 | 3 | 60 | 70 | 10 | 15 | 20 | 30 | |||
| 90 | 20 | 30 | ||||||||||||
| 4 | 21.7 | 14.4 | 10.8 | 7.1 | 4 | 60 | 70 | 10 | 15 | 20 | 30 | |||
| 90 | 20 | |||||||||||||
| 5 | - | - | 13.6 | 9.0 | 5 | 60 | 70 | 20 | 30 | |||||
| 90 | 20 | |||||||||||||
| 6 | - | - | 16.4 | 10.8 | 6 | 60 | 70 | 20 | 30 | |||||
| 90 | 20 | |||||||||||||
Specifications
| Part Number | - | L | - | A | ||
| EMSG2 | - | 60 | - | 30 | ||
Example
・Oblique gates require angular hole processing that are
often difficult by drilling. Electro discharging is suitable
for preparing an angular hole in places where the drill tip
would not be well aligned or broken.
・The di dimension is dependent on the runner diameter (W).
Select the appropriate P dimension in accordance with d1.
[ ! ]The electrode's tip may be bent if it is dropped or its tip
directly touches other objects.
If so, make sure to perform dressing before using it for
rotating discharge process.
often difficult by drilling. Electro discharging is suitable
for preparing an angular hole in places where the drill tip
would not be well aligned or broken.
・The di dimension is dependent on the runner diameter (W).
Select the appropriate P dimension in accordance with d1.
[ ! ]The electrode's tip may be bent if it is dropped or its tip
directly touches other objects.
If so, make sure to perform dressing before using it for
rotating discharge process.