L-SHAPED SWIVEL HOSE NIPPLES
Brand :
MISUMI
Caution
Product Description
[Application]
・Hose nipple for changing direction when installing a mold.
[Effects/benefits of use]
・After tightening the screw, the head can be rotated to adjust the angle of the socket connection part.
[Usage]
・For mold cooling piping.
 Click here for the difference of inner structure of swivel type. |
Values in ( ) are reference only.Hexagonal holes bored at the tapered screw end.LSNM
Body: Brass C3604(C36000)(CU-ZN)lnner parts: Brass (C2700W)
Fluoric rubber Fluoric rubber grease
LSN
Brass C3604(C36000)(CU-ZN)Thread JIS B 0203 tapered thread for tubing R (PT)
Specifications
| For hose | L | L2 | Allen side B | Allen wrench hole d | Tapered thread R(PT) | ℓ1 | Part Number | ||
| D | ℓ | Type | No. | ||||||
| 12.6 | 22.5 | 35.5 | 16.5 | 20 | 6 | 1/8 | 9.5 | LSNM | 1 |
| 38.5 | 8 | 1/4 | 12.5 | 2 | |||||
| 39.5 | 8 | 3/8 | 13.5 | 3 | |||||
| 36.5 | 15.75 | 19 | 5 | 1/8 | 9.5 | LSN | 1 | ||
| 39.5 | 6 | 1/4 | 12.5 | 2 | |||||
| 42.5 | 17.75 | 6 | 3/8 | 13.5 | 3 | ||||
Use in normal pressure 980kPa (10kgf/cm2) or lower. Keep water temperature under 120°C.Example
The L-shaped swivel is intended for direction conversion when it is installed on the mold. Note that if you carry out direction conversion continuously by opening and closing the mold, for example, during molding, the O-ring will deteriorate, resulting in water leakage.