HOSE NIPPLES -HEXAGONAL HOLE TYPE (FOR HEXAGONAL WRENCH INSTALLATION)-
Brand :
MISUMI
Caution
Product Description
[Application]
・Hose nipple for attaching a hex wrench.
[Effects/Benefits of Use]
・If the hose nipple breaks, it can be easily removed as there is a hex wrench hole cut on the inner diameter side.
[Usage]
・For mold cooling piping.
Through hexagonal hole for wrenching.
Brass C3604(C36000)(CU-ZN)Thread JIS B 0203 tapered thread for tubing R (PT)
Through hexagonal hole for wrenching. Brass C3604(C36000)(CU-ZN)Thread JIS B 0203 tapered thread for tubing R (PT)
Allen wrenching hole on both ends (nipple and tapered thread parts).The hex-wrench hole extends to a point mid-way from both ends. It is not fully pierced.
Brass C3604(C36000)(CU-ZN)Thread JIS B 0203 tapered thread for tubing R (PT)
Specifications
| For hose | D1 | L | Allen wrench hole d | Tapered thread R(PT) | ℓ1 | Part Number | ||
| D | ℓ | Type | No. | |||||
| 12.6 | 22.5 | 13 | 34.5 | 6 | 1/8 | 9 | NPWN | 1 |
| 14 | 36.5 | 1/4 | 11 | 2 | ||||
| 13.2 | 27 | 18 | 46 | 8 | 3/8 | 15 | 3 | |
| 12.6 | 22.5 | 18 | 40.5 | 6 | 3/8 | 15 | NPWNC | 3 |
Use in normal pressure 980kPa (10kgf/cm2) or lower.| For hose | D1 | L | Allen wrench holed | Tapered thread R(PT) | ℓ1 | Part Number | ||
| D | ℓ | Type | No. | |||||
| 12.6 | 16.5 | 13 | 28.5 | 6 | 1/8 | 9 | NPWS | 1 |
| 17.5 | 14 | 31.5 | 1/4 | 11 | 2 | |||
Use in normal pressure 980kPa (10kgf/cm2) or lower.| For hose | D1 | D2 | Allen wrench holed | Tapered thread R(PT) | ℓ1 | Part Number | L 10mm increments | ||
| D | ℓ | Type | No. | ||||||
| 12.6 | 22.5 | 14 | 10 | 6 | 1/8 | 9 | NPWL | 1 | 50~200 |
| 13.2 | 1/4 | 11 | 2 | ||||||
Use in normal pressure 980kPa (10kgf/cm2) or lower.