Quick-Fitting Joints For Mold Cooling -Separate Plugs・Sockets/(Heat-Resistant 99degree Series) /Plugs-

[Features]
- The plug (joint part), socket (thread part) and tube can be attached and detached with one touch.
- When the plug is removed, no socket protrusions remain on the mold.
- Heat medium, water (clean water), and air can be used as fluids.
- The threaded part of the socket is heat-resistant sealed, so there is no need for sealing tape or other sealing material.
(The sealing effect only takes 2-3 times, so please use sealing tape, etc. after that.)

[Notes]
- Please use at a water temperature of 99°C or below.
- Please use the product by keeping the surge pressure (pressure instantaneously applied due to impact flow, etc.) to below the maximum working pressure (0.9MPa).