Date Marked Pin (Outside Rings For PL Exchange Type) - Outer Corner Tapered Type -

Brand :

MISUMI

Caution

Product Description

Date Marked Pin Set for Plastic Mold, date marked pin sets are embedded in a cavity or core surface of mold. It's used for engraving number of date, month, year, letter or sign on the injection plastic parts. It can help to reduce cost without having to engrave molds and can be replaced.

SUS420 J2(S42000)(1.4028)

50~53HRC

Outside Rings For PL Exchange Type (Outer Corner Tapered Type):Related Image

D	Dm6		Dh7		L	E	a	b	Taper height x
4	4	+0.012 +0.004	4	0 -0.012	8	2.8	1.0	1.2	0.4
5	5	+0.012 +0.004	5	0 -0.012	8	2.85	1.0	1.2	0.4
6	6	+0.012 +0.004	6	0 -0.012	8	2.9	1.0	1.2	0.5
8	8	+0.015 +0.006	8	0 -0.015	10	3.4		1.5	0.5
10	10	+0.015 +0.006	10	0 -0.015	12	4.2		1.5	0.5
12	12	+0.018 +0.007	12	0 -0.018	14	4.4	1.2	1.5	0.5
16	16	+0.018 +0.007	16	0 -0.018	14	5.0	1.4	1.8	0.5

For the relationship between taper height and mark depth,

click here to refer to the features of outer corner tapered type.

Outside rings on this page are adapted for combination with the inside arrows

(click here)

Specifications

•Dimension Table
■Year Switching Type

Indication	Outside rings divisions	Part Number		Year
		Type	D
4 years type	12 uniform divisions	DTX-RT	4	19 for 2019~2022 20 for 2020~2023 (Designation possible from Sep.2019) 21 for 2021~2024 (Designation possible from Sep.2020)
			5
			6
			8
			10
			12
			16
6 years type	12 uniform divisions	DTXS-RT	4	19 for 2019~2024 20 for 2020~2025 (Designation possible from Sep.2019) 21 for 2021~2026 (Designation possible from Sep.2020)
			5
			6
			8
			10
			12
			16

■Month/Day/No-marking Type

Indication	Outside rings divisions	Part Number
		Type	D
Month	12 uniform divisions	DTDX-RT	4
			5
			6
			8
			10
			12
			16
Day (1st digit)	12 uniform divisions	DTEX-RT	4
			5
	10 uniform divisions		6
			8
			10
			12
			16
Day (10th digit)	12 uniform divisions	DTFX-RT	4
			5
			6
			8
			10
			12
			16

■Character Designation Type

Indication
1M (1 place)	2M (2 places)	3M (3 places)	4M (4 places)	5M (5 places)	6M (6 places)	10M (10 places)	12M (12 places)
Engraving position	Engraving position	Engraving position	Engraving position	Engraving position Outside ring is divided equally among ten.	Engraving position	Engraving position Outside ring is divided equally among ten.	Engraving position
Up to 3 characters can be designated at each engraving position.			Up to 2 characters can be designated at each engraving position.			Only 1 character can be designated at each engraving position.

Part Number			Engraving characters (1~3 characters/Characters printed in blue in indications)
Type	Indication	D	Engraving Position (1)~(12)
DTX-RT	1M 2M 3M 4M 5M* 6M* 10M* 12M	4
		5
		6
		8
		10
		12
		16
Use ¥ for indicating / (slash), # for - (minus) and % for (space) . *Not applicable to D4 and D5 of 5M, 6M and 10M.

●Dividing of outside rings

1M•2M•3M•4M 6M•12M	12 uniform divisions
5M•10M	10 uniform divisions