Linear Bushing Housing Units with Dowel Holes - Tall Blocks - Single / Double

Brand :

MISUMI

Caution

Product Description

MISUMI original standard. Compared to the standard type, the dowel hole type reduces equipment assembly time and improves position repeatability.

Single Type

Double Type

Long

Type			Linear Bushing Used	Housing		Operating Ambient Temperature
Single Type	Double Type	Long		[M] Material	[S] Surface Treatment	Operating Ambient Temperature
LHSSN	LHSSWN	LHSSLN	LMU	Aluminum Alloy	Clear Anodize	－20 to 80°C

Specification Table

Part Number
LHSSN16 LHSSWN20L LHSSN16G LHSSWN20H	(L Type Greased) (G Type Greased) (H Type Greased)

[ ! ] Alternative grease types available.

dr	Tolerance			D	(S)	L			L₁			L₂			h	W	H	L	A	B	M₁ (Effective Length)	M2 (Effective Length)	d₁ × t	C
dr	Single	Double	Long	D	(S)	Single	Double	Long	Single	Double	Long	Single	Double	Long	h	W	H	L	A	B	M₁ (Effective Length)	M2 (Effective Length)	d₁ × t	C
8	0 －0.009	0 －0.010	—	15	3.0	32	56	—	20	30	—	10	42	—	16	20	26	5	—	—	M5 (8.5)	M4 (15)	6 × 5 (For M3 Screws)	1
10				19	4.0	39	68	—	27	36	—	15	50	—	19	26	32	6	—	—	M6 (9.5)	M5 (20)	8 × 6 (For M4 Screws)
12				21		40	70	—	27	36	—	15	50	—	20	28	34	6	—	—	M6 (9.5)	M5 (22)	8 × 6 (For M4 Screws)
13				23		42	74	—	28	42	—	16	55	—	25	30	43	7	—	—	M6 (13)	M6 (23)	9 × 7 (For M5 Screws)
16			0 －0.015	28	3.8	47	84	121	32	52	74	18	65	90	27	36	49	7	7	7	M6 (13)	M6 (29)	9 × 7 (For M5 Screws)
20	0 －0.010	0 －0.012	0 －0.018	32	3.8	52	94	136	36	58	82	18	70	102	31	42	54	8	0	8	M8 (15)	M8 (34)	11 × 8 (For M6 Screws)
25				40	3.2	69	128	187	42	80	116	22	100	140	37	52	65	9		9	M10 (17)	M10 (42)	14 × 10 (For M8 Screws)
30				45	3.2	74	138	202	44	90	128	22	110	152	40	58	71	9		9	M10 (17.5)	M10 (48)	14 × 10 (For M8 Screws)

[!] Make certain that the screws do not interfere with the bushing as M₁ are through holes. [!] Position of dowel holes for Double Type and Long Type is ±0.02 from the center of dr.
[!] The datum surface is located on the other side of Part Number label. [!] Inner surfaces of dowel holes are not anodized. [!] Anti-rust oil is applied at the time of delivery.

dr	Dowel Hole Dimensions							Basic Load Rating						Allowable Static Moment			Mass (g)
	P	G	ℓ₂	E			F	C (Dynamic) N			Co (Static) N			(N⋅m)			Mass (g)
	P	G	ℓ₂	Single	Double	Long	F	Single	Double	Long	Single	Double	Long	Single	Double	Long	Single	Double	Long
8	2.5	3.5	3	22	16	—	12	265	431	—	380	784	—	—	4.31	—	40	75	—
10	4	5	5	29	20	—	16	372	588	—	549	1100	—	—	7.24	—	80	150	—
12				29	20	—	18	412	657	—	598	1200	—	—	10.9	—	90	168	—
13				30	26	—	20	510	813	—	784	1570	—	—	11.6	—	132	248	—
16				32	36	50		775	1230	1230	1180	2350	2350	—	19.7	73.5	204	383	569
20	5	6	6	36	38	60		882	1400	1400	1370	2740	2740	—	26.8	98.0	272	520	788
25				42	58	90	26	980	1560	1560	1570	3140	3140	—	43.4	157	574	1120	1653
30				44	68	100	30	1570	2490	2490	2740	5490	5490	—	82.8	297	710	1384	2041