Linear Guides for Super Heavy Load - Stainless Steel - With Plastic Retainers, Interchangeable, Light Preload

Brand :

MISUMI

Caution

Product Description

Linear Guides for Super Heavy Load - Stainless Steel - With Plastic Retainers, Interchangeable, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 220 and 1480
● Assembly Height (mm.): 30 and 40
● Block Type : Standard Block
● Material: Stainless Steel (SUS440C Equivalent) 57HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

Type (Part Number)

Drawing

Specification / Dimensions Table

Basic Load Rating, etc.

Alterations (Optional)

Type (Part Number)

Material (Hardness)	Rail Length Type 1	Type A 2		Block Only	Rail Only	KL (Lubrication Unit) Equipped/Not Equipped	Height (H) B
Material (Hardness)	Rail Length Type 1	1 Block	2 blocks	Block Only	Rail Only	KL (Lubrication Unit) Equipped/Not Equipped	Height (H) B
Stainless Steel [SUS440C Equivalent] (57HRC or more)	Standard length (Selectable)	SSHRZ	SSH2RZ	SSHRB	SSHZL	Blank: None －KL : Provided	30 40
Stainless Steel [SUS440C Equivalent] (57HRC or more)	1 mm increments (Dimension Configurable)	SSHRLZ	SSH2RLZ	SSHRB	SSHZLF	Blank: None －KL : Provided	30 40

1If the desired rail length is not available in the standard length (selectable), please specify the length in 1 mm increments (dimension configurable).

2If a 3- to 4-block product is desired, please select a part number for a 1-block product and specify "B3 (3 blocks)" or "B4 (4 blocks)" for alterations.

[ ! ]Heat resistant temperature is 0 to 50°C.

[ ! ]Features resin retainers between the steel balls to prevent the balls from coming into contact with each other, thereby helping minimize noise during high-speed operation.

[ ! ]For the type with resin retainers, blocks and rails can be purchased separately.

[ ! ]Blocks and rails cannot be purchased separately for MISUMI Linear Guides other than those with resin retainers.

Part Number Configuration

Set

Type	Height H	-	Rail Length L	-	Alterations
A	B
SSHRZ	30	-	940			（SSHRZ30-940）
SSHRLZ	30	-	962	-	LLC	（SSHRLZ30-962-LLC）
SSHRLZ-KL	30	-	984	-	B4	（SSHRLZ-KL30-984-B4）

Block Only

Type		Height H
SSHRB		30		（SSHRB30）

Rail Only

Type	Height H	-	Rail Length L
SSHZL	30	-	940	（SSHZL30-940）
SSHZLF	36	-	968	（SSHZLF30-968）

Drawing

	■Dimension Diagram of Block with KL (Lubrication Unit)

[!]For L Dimension Configurable Type, G dimensions differ from those shown in the table below.
[!]For the type with resin retainers, blocks and rails can be purchased separately.

■H/W₂ Dimensional Accuracy

Type		Standard Accuracy	Assembly Height（H）	Precision（μm）
Type		Standard Accuracy	Assembly Height（H）	Interchangeable
Linear Guides for Medium/Heavy Load	With Plastic Retainer, Interchangeable, Light Preload	Height H Tolerance	24～42	±20
		Pair Variation of Height H		15
		Width W₂ Tolerance		±30
		Pair Variation of Width W₂		25

■Tolerances of Other Symbols

Dimension Range		Tolerance （mm）
Over	or Less	Tolerance （mm）
0.5	3	±0.1
3	6	±0.1
6	30	±0.2
30	120	±0.3
120	400	±0.5
400	1000	±0.8
1000	2000	±1.2

Compliant with JIS B 0405-1991 Class m (intermediate)

Specification Table

Block Type	KL	H	L	Block Dimensions												Rail Dimensions
				W	L₁		B	C	S × ?	L₂	K	T	Grease Fitting			H₁	W₁	W₂	Counterbored Hole	F	G 3
				W	Standard	with KL	B	C	S × ?	L₂	K	T	Mounting Hole	E	T₁	H₁	W₁	W₂	d₁ × d₂ × h	F	G 3
Standard Block	Blank: None －KL : Provided	30	220 to 1480	44	69.8	80.4	32	36	M5 × 6	50	25	12	M6 × P0.75	11	5	18	20	12	6 × 9.5 × 8.5	60	20
	Blank: None －KL : Provided	40	220 to 1960	48	79	90.6	35	35	M6 × 9	58	33	12	M6 × P0.75	11	10	22	23	12.5	7 × 11 × 9	60	20

3For L Dimension Configurable Types, both ends of the rail are evenly cut. G dim. resulting from this cutting process will differ from those indicated on the above table.

!Grease fittings are screw-in types, and thus, can be repositioned.

!Correctly match the datum planes (the side with the straight grooves) of both the rail and block.

Standard Rail Length (Selectable) List

The table below lists the standard rail lengths for each size. Please select the rail length from here.
Lengths not listed in the table below can be custom specified in 1 mm increments.

Height (H)	Rail Length (L)
30	220	280	340	400	460	520	580	640	700	760	820	880	940	1000	1060	1120	1180	1240	1300	1360	1420	1480
40	220	280	340	400	460	520	580	640	700	760	820	880	940	1000	1060	1120	1180	1240	1300	1360	1420	1480

Basic Load Rating / Allowable Static Moment / Mass

kgf = N × 0.101972

Height (H)	Basic Load Rating 4		Allowable Static Moment						Mass
	C (Dynamic) kN	Co (Static) kN	Block 1 pc.			Block 2 pcs. in close contact			Standard Block kg	Guide Rail kg/m
	C (Dynamic) kN	Co (Static) kN	M_A N⋅m	M_B N⋅m	M_C N⋅m	M_A N⋅m	M_B N⋅m	M_C N⋅m	Standard Block kg	Guide Rail kg/m
30	16.3	29.6	167	141	199	1050	875	199	0.33	2.6
40	22.4	37.5	246	207	295	1540	1290	295	0.55	3.6

4The basic load rating is the same for all four directions (radial, reverse-radial, and lateral directions) relating to blocks. Can be used in any orientation.

The guideline for the allowable load and allowable moment of the linear guide is the value obtained by dividing each value (above table) by the static safety factor fs (below table).
Example: Allowable load (kN) for H30 under normal driving conditions: 29.6/2 = 14.8 (Approx. 1,510 kg)

Static Safety Factor (Lower Limits of fs)

Condition of Use	Lower Limits of fs
For normal operating condition	1 to 2
When smooth running performance is required	2 to 4
When there is vibration or impact	3 to 5

Allowable Load (N) ≤ Co/fs
Allowable Moment (N⋅m) ≤ (M_A, M_B, M_C)/fs

fs: Static Safety Factor Co: Basic Static Load Rating
M_A, M_B, M_C: Allowable Static Moment (N⋅m)

Mounting and Handling

■Datum Plane and Mounting Direction

Datum plane has the Datum Plane Mark (groove) on the block and rail (Fig. A). Be sure to match the datum planes for use.
The mounting direction shown in Fig. B is acceptable. All the basic load ratings are same.

Fig. A

Fig. B

■ Precautions for Use

[ ! ]Blocks are equipped with retainers to prevent the balls from derailing.
[ ! ]For Interchangeable, Light Preload Type, rails and blocks can be interchanged.
[ ! ] Straight grooves are provided on datum planes. Be sure to match the datum planes for use. Be sure to match the datum planes for use.
[ ! ]Rails cannot be connected end to end.
[ ! ]The accuracy of Linear Guides is guaranteed after mounting the rail (after fastening screws on the rail and pushing it onto the datum plane).
Minor bending of the rail will be adjusted by being secured and will not affect the performance.

■Others

Filled with lithium soap based grease (Alvania Grease S2 by Showa Shell Sekiyu K.K) before shipment.
Greasing with a different brand of grease is not recommended. Please use the same brand of grease.
Angled Grease Fitting Type
Grease fittings are screw-in types, and thus, can be repositioned.

■Standard Grease Fitting Position

When the datum plane is in front, the grease fitting is attached in the direction shown in the diagram below.

■Lubrication Unit

●Advantages of Lubrication Unit KL:
Provides long term maintenance-free operation.
Reduces maintenance cost.
Most suitable where the design does not allow lubrication.

Alterations

Code

Alterations

Specifications

Notes

LLC
RLC

LLC: Left End Cut
RLC: Right End Cut

·Cuts rail ends.
·Rails are cut with the engraved side as front (datum plane as back).
(as shown in the image on the left)
·Please refer to the table below for the length of the rail to be cut.

Dimension H	L Cut	N
30	10	10
40	10	10

!The overall length will be shortened by the amount of cutting.
Example: The L dimension of SSHRZ30-880-LLC is 870 mm.
!Applicable only to Selectable Type (standard rail length).

B3
B4

B3: Additional Block (Total 3 pcs.)
B4: Additional Block (Total 4 pcs.)

3-Block Specifications

4-Block Specifications

·It will be shipped with 3 (4) blocks installed.
·There is a minimum length limit for the L dimension (rail length).
Please refer to the table below "Shortest Selectable Rail Lengths for B3/B4."

!Please specify the part number for one block.
(× SSH2RZ30-880-B4)

■Shortest Selectable Rail Lengths for B3/B4

H	B3 (3-block)	B4 (4 blocks)
30	340	400
40	400	460