Strut Clamps - Unequal Dia., Perpendicular Configuration / Reversed
Brand :
MISUMI
Caution
Product Description
Strut clamp that is used by crossing reducing struts at right angles. [Material]·Aluminum alloy, general structural steel, SUS304
Dimensional Drawing
Unequal Dia., Perpendicular Configuration
Unequal Dia.,
Perpendicular
Configuration
Reversed
D=8 to 12
D=15 to 50
D=8 to 12
D=15 to 50
* For Unequal Dia., Perpendicular Configuration, Reversed, the fastening screws are inserted in the opposite direction of the Unequal Dia., Perpendicular Configuration.
[!] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, B and C dimensions, slit width W dimension, and 2 mm tolerance are excluded.
[!] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, B and C dimensions, slit width W dimension, and 2 mm tolerance are excluded.
Product Specifications
[ ! ] CB screws are included with the black oxide and black anodized products,
and SCB screws are included with the other products.
and SCB screws are included with the other products.
| Type | [M] Material | [S] Surface Treatment | [A] Accessory | |
| Unequal Dia., Perpendicular Configuration | Unequal Dia., Perpendicular Configuration, Reversed | |||
| KLSTN | KLSTK | Steel for General Structure Structural Steel | Black Oxide | Hex Socket Head Cap Screw |
| MLSTN | MLSTK | Electroless Nickel Plating | Hex Socket Head Cap Screw (Stainless Steel) | |
| ALKLN | ALKLK | Aluminum Alloy | Black Anodize | Hex Socket Head Cap Screw |
| HLKLN | HLKLK | Clear Anodize | Hex Socket Head Cap Screw (Stainless Steel) | |
| SLKLN | SLKLK | SUS304 | — | |
■Included Screw
| D | Included Screw |
| 8 | M4-8, M4-12, 1 pc. each |
| 10 | M5-12, M5-10, 1 pc. each |
| 12 | M5-15, 2 pcs. |
| 15 | M5-20, M5-15, 2 pcs. each |
| 20 | M6-25, M6-20, 2 pcs. each |
| 25 | M6-30, M6-25, 2 pcs. each |
| 30 | M8-35, M8-30, 2 pcs. each |
| 35 | M8-40, M8-35, 2 pcs. each |
| 40 | M8-45/M8-40, 2 pcs. each |
| 50 | M10-55/M10-45, 2 pcs. each |
■Maximum Load Test
Tighten shafts and strut clamps by standard tightening torque [N • m],
and conduct a maximum load test to observe the moment that the shaft and strut clamp start to move.
[ ! ]E Maximum Load (kN) values shown are for reference only, and not guaranteed ones.
Tighten shafts and strut clamps by standard tightening torque [N • m],
and conduct a maximum load test to observe the moment that the shaft and strut clamp start to move.
| Round | Square | ||
| Max. Load (kN) | Max. Load (kN) | ||
 |  | ||
| S45C equivalent Shaft Bore φ20 | Bolt Type | M5-20 (Single Clamp) | M6-25 (Single Clamp) |
| Vertical Load | 12.63 | 13.12 | |
| Rotation Load | 0.96 | 0.97 | |
| Aluminum alloy Shaft Bore φ10 | Bolt Type | M4-10 (Single Clamp) | M5-15 (Single Clamp) |
| Vertical Load | 10.59 | 8.26 | |
| Rotation Load | 0.72 | 0.58 | |
App. Example
