Manifold Hydraulic/Outlets 1 Side/2 Inlets
Brand :
MISUMI
Caution
Product Description
* Materials
Thread
JIS B0203 R (PT)
ANSI/ASME B.I.20.1-1983(NPT)
*No. 4 is selected in the drawing. Number of port threads is 6.
(the port thread number indicates the total thread numbers of R･G･K.)
Standard Mounting Hole
*Mounting Hole Shape Change
Refer to Manifolds Recommended Tightening Torque Page for the recommended tightening torque/through hole pilot hole diameter for the tapered male threads. Material SUS304（Block Square 50） 3rd day →3rd day/Shortened to Express Service A.
Mounting Hole can be selected as desired.
When a mounting hole shape change is not specified, the mounting hole standard shape is applied.
| Type |  Material |  Surface Treatment | Normal Pressure | |||
| Pitch (P) Fixed | ||||||
| 30 x 35 Sq. | 40 Square | 50 Square | 70 Square | |||
| BMRS | BMRF | BMRFL | BMRL | SS400 | Trivalent Chromate | 20.6MPa=~210kgf/cm2Or Less |
| BMRSM | BMRFM | BMRFLM | BMRLM | Electroless Nickel Plating | ||
| BMRSR | BMRFR | BMRFLR | - | SUS304 | - | 1MPa=~10kgf/cm2Or Less |
| - | BMRFS | - | - | SUS316 | ||
| - | BMRFC | - | - | Brass | ||
Thread
JIS B0203 R (PT)
ANSI/ASME B.I.20.1-1983(NPT)
*No. 4 is selected in the drawing. Number of port threads is 6.
(the port thread number indicates the total thread numbers of R･G･K.)
Standard Mounting Hole
*Mounting Hole Shape Change
Refer to Manifolds Recommended Tightening Torque Page for the recommended tightening torque/through hole pilot hole diameter for the tapered male threads. Material SUS304（Block Square 50） 3rd day →3rd day/Shortened to Express Service A.
Mounting Hole can be selected as desired.When a mounting hole shape change is not specified, the mounting hole standard shape is applied.Specifications
| Part Number | *Rc (PT), NPT Selection | Pitch P | No. of Pitches N | Port Thread No. | A | B | E | F | X | Y | Mounting Hole Dimension | |||||||||
| Type | Mounting Hole Options | No. | R | G·K | Fixed Type | d | D | h | M | D1 | d1 | h1 | ||||||||
| (30×35 sq.) Pitch Fixed BMRS BMRSM BMRSR d1dimension in ( ) is only applicable to SUS304. | NA(Through) T(Tap) ZT(Counterbore Tap) | 1 | 1(1/8) 2(1/4) | 1(1/8) 2(1/4) | 30 | 0 | 3 | 30 | 35 | 20 | 20 | 15 | 6 | 5.5 | 9.5 | 5.5 | M5 | 8 | 4.2 (4.3) | 4.5 |
| 2 | 1 | 4 | ||||||||||||||||||
| 3 | 2 | 5 | ||||||||||||||||||
| 4 | 3 | 6 | ||||||||||||||||||
| 5 | 4 | 7 | ||||||||||||||||||
| 6 | 5 | 8 | ||||||||||||||||||
| 7 | 6 | 9 | ||||||||||||||||||
| 8 | 7 | 10 | ||||||||||||||||||
| (x 40) Pitch Fixed BMRF BMRFM BMRFR BMRFS BMRFC | 1 | 1(1/8) 2(1/4) 3(3/8) 1N(NPT1/8) 2N(NPT1/4) 3N(NPT3/8) | 2(1/4) 3(3/8) 4(1/2) 2N(NPT1/4) 3N(NPT3/8) 4N(NPT1/2) | 40 | 0 | 3 | 40 | 40 | 35 | 20 | 20 | 7 | 6.6 | 11 | 6.5 | M6 | 9.5 | 5.1 | 5.5 | |
| 2 | 1 | 4 | ||||||||||||||||||
| 3 | 2 | 5 | ||||||||||||||||||
| 4 | 3 | 6 | ||||||||||||||||||
| 5 | 4 | 7 | ||||||||||||||||||
| 6 | 5 | 8 | ||||||||||||||||||
| 7 | 6 | 9 | ||||||||||||||||||
| 8 | 7 | 10 | ||||||||||||||||||
| (50 sq.) Pitch Fixed BMRFL BMRFLM BMRFLR | 1 | 2(1/4) 3(3/8) 4(1/2) 6(3/4) | 2(1/4) 3(3/8) 4(1/2) 6(3/4) | 60 | 0 | 3 | 50 | 50 | 30 | 28 | 20 | 8 | 8.5 | 14 | 8.5 | M8 | 11 | 6.8 | 6.5 | |
| 2 | 1 | 4 | ||||||||||||||||||
| 3 | 2 | 5 | ||||||||||||||||||
| 4 | 3 | 6 | ||||||||||||||||||
| 5 | 4 | 7 | ||||||||||||||||||
| 6 | 5 | 8 | ||||||||||||||||||
| (70 sq.) Pitch Fixed BMRL BMRLM | 1 | 6(3/4) 8-1 | 8-1 | 60 | 0 | 3 | 70 | 70 | 40 | 35 | 25 | 9 | 8.5 | 14 | 8.5 | M8 | 11 | 6.8 | 6.5 | |
| 2 | 1 | 4 | ||||||||||||||||||
| 3 | 2 | 5 | ||||||||||||||||||
| 4 | 3 | 6 | ||||||||||||||||||
Select * marked R / G / K by the numbers of 1 / 2 / 3 / 4 / 6 / 8 / 1N / 2N / 3N / 4N in front of ( ).Mounting holes at L/2 for No. 6/8, at P/2 of 2 / 3 port, 5 / 6 port from left for No. 7.SUS316 / Bras is up to 6 connections.