Low Pressure Fittings/90 Deg. Elbow

Brand :

MISUMI

Caution

[Specification Change] The materials and appearances of some part numbers will be changed sequentially starting in September 2026. Please see here for details. Products before and after the change may be mixed in the same shipment, but there are no problems with use.
Please check the content on our website as the PDF does not contain the most up-to-date information.

Product Description

[Connection Type] Thread to Thread, Equal Diameter / Same Type, [Connection Shape] 90° Elbow, [Material and Surface Treatment] Selectable from FCMB270 / Hot Zinc Plating, SUS304 Equivalent / None, and SUS316 Equivalent / None.

Type	[ M ] Material	[ S ] Surface Treatment
SGPPE	FCMB270	Hot Zinc Plating
SUTPE	SUS304 Equivalent	-
SUTPES	SUS316 Equivalent	-

Specifications/Overview

Applicable Standards

■Similar Products: JIS B 2301, JIS B 2302, JIS B 0203 Complaint
■C-VALUE Products: ISO 4144 Complaint, GB/T 7306 Equivalent
■Fitting Material

Fitting Type	Steel	Stainless Steel
Low Pressure Screw Fittings	Casting: FCMB270 (Malleable Casting) or Equivalent * Customers who are particular about external appearance should note that surface is rough because of limitations in the manufacturing process.	Cast Product: SCS13A (SUS304 Equivalent) SCS14A (SUS316 Equivalent) or Equivalent
High Pressure Screw Fittings	S25C or Equivalent	SCS13A (SUS304 Equivalent)

Pressure, Temperature Standards

■Similar Products / C-VALUE Products Common Specifications

Fluid State (°C)	Max. Operating Pressure (Mpa)
Steam, Air, Gas, Oil: Up to 300°C	1.0
Steam, Air, Oil, Pulsating Water: Up to 200°C	1.4
Static Flow Water: Up to 120°C	2.0

* Pulsating Water is a stream of water that is generated under steady operating conditions and varies in pressure and flow rate on a cycle basis.
* Static Flow Water is a non-pulsating stream of water.