6 Series Single Joint Kit for Aluminum Frame Blind Joints
Brand :
MISUMI
Caution
Product Description
The additional D holes required for Aluminum Frame does not penetrate to the flat surface. This is a particularly good appearance blind joint.
Dimensional Drawing of Blind Joint Parts
| ●Single Blind Joint Parts Kit - Standard Type - Used to drill one hole in each of the two frames to be connected, and connect the frames at right angles at the ends of the frames. | ||
| HSJ(Steel type) HSJS(Stainless steel type) | ①Blind Joint Parts nut (SS400) Stainless steel nut (equivalent to SUS304/SUS316, sintered) | ②Blind Joint Parts plate (SPCC) Stainless steel plate (SUS304) |
 |  |  |
| [ ! ]The stainless steel nuts are made of SUS304 only for 6-50 and 6-60. | ||
| ●Single Blind Joint Parts kit - narrow type - The narrow type has a modified shape so that the connection part is less likely to collide with the panel when fitting the panel into the frame groove. | ||
| HSJNS(stainless steel type) | ① Blind Joint Parts nut Stainless steel nut (equivalent to SUS316, sintered) | ②Narrow type Blind Joint Parts plate (SUS304) |
 |  |  |
| Type | Components | |||||
| ①Blind Joint Parts nut | ② Plate | ③Bolt | ||||
| [M] Material | [S] Surface Treatment | [M] Material | [S] Surface Treatment | [M] Material | [S] Surface Treatment | |
| HSJ | SS400 | Trivalent Chromate | SPCC | Trivalent Chromate | SCM435 | Trivalent Chromate |
| HSJS HSJNS | SUS316 equivalent SUS304 | − | SUS304 | − | SUS304 | − |
Specification Table of Blind Joint Parts
| Blind Joint Parts Model |
| HSJ6 |
■Single Blind Joint Parts Kit - Standard/Narrow Type -
The price list below is currentas of April 2011.
After confirming the model number, click the "Check Price" button to check the latest price.
①Blind Joint Parts nut dimensions
②Blind Joint Parts plate dimensions
■List of frames compatible with single Blind Joint Parts (frames not listed in the table cannot be used)
[ ! ]Please check with WOS if the quantity exceeds the displayed quantity.
The price list below is currentas of April 2011.
After confirming the model number, click the "Check Price" button to check the latest price.
| kinds | Model | Compatible frame (type) | ①Blind Joint Parts nut (1 piece) | ②Blind Joint Parts plate | ③Hexagonal socket button bolt | ||||||||
| Type | No. | SS400 | SUS304/SUS316 equivalent | SPCC | Quantity | SUS304 | Quantity | SCM435 | Quantity | SUS304 | Quantity | ||
| Standard Type | HSJ (Stainless steel type) | 6 | See bottom of page | Nut 6 | Stainless Steel Nut 6 | Plate 6 | 1 | Stainless Steel Plate 6 | 1 | Button bolt M6-25 | 1 | Button bolt stainless steel M6-25 | 1 |
| 6−50 | − | Stainless steel nut 6-50 | − | − | Stainless Steel Plate 6-50 | 2 | − | − | 2 | ||||
| 6−60 | Stainless steel nut 6-60 | Stainless Steel Plate 6 | |||||||||||
| Narrow Type | HSJNS (stainless steel type) | 6 | Stainless Steel Nut 6 | Narrow Plate 6 | 1 | Button bolt stainless steel M6-25 | 1 | ||||||
| 6−50 | Stainless steel nut 6-50 | Narrow Plate 6-50 | 2 | 2 | |||||||||
| 6−60 | Stainless steel nut 6-60 | Narrow Plate 6 | |||||||||||
| kinds | size | M | D | P | L |
| nut | 6 | 6 | 11 | − | 12 |
| 6−50 | 20 | 32 | |||
| 6−60 | 30 | 42 |
| kinds | size | N | A | SPCC | SUS304/SUS316 equivalent | ||||||||
| B | L | T | t | B | E | L | T | t | K | ||||
| plate | 6 | 6.5 | 8 | 14 | 29 | 7.6 | 1.6 | 14 | − | 29 | 7.5 | 1.5 | − |
| 6−50 | 19 | 19 | |||||||||||
| Narrow Plate | 6 | 6.5 | 5 | − | 15 | 3 | twenty five | 7.5 | 1.5 | 12.2 | |||
| 6−50 | 19 | ||||||||||||
| Frame | |||||||
| 6 series 30, 50, 60, 100mm square (groove width 8mm) | |||||||
| Blind Joint Parts Features | Type | No. | Corresponding single joint | Features | Type | No. | Corresponding single Blind Joint Parts |
| 4-sided groove | HFS6 GFS6 EFS6 CAF6 HFSY6 NFS6 NEFS6 | 3030 | HSJ6 / HSJS6 / HSJNS6 | 1 grooved surface, 3 flat surfaces | HFSC6 EFSC6 | 3030 | HSJNS6 |
| 3060 | HSJ6 / HSJS6 / HSJNS6 | ||||||
| 3090 | HSJ6 / HSJS6 / HSJNS6 | Light Type | HFSL6 | 3030 | HSJ6 / HSJS6 / HSJNS6 | ||
| 30120 | HSJ6 / HSJS6 / HSJNS6 | 3060 | HSJ6 / HSJS6 / HSJNS6 | ||||
| 5050 | HSJS6-50 / HSJNS6-50 | Black Anodized | HFSB6 EFSB6 NEFSB6 | 3030 | HSJ6 / HSJS6 / HSJNS6 | ||
| 6060 | HSJS6−60 / HSJNS6−60 | 3060 | HSJ6 / HSJS6 / HSJNS6 | ||||
| 6090 | HSJS6−60 / HSJNS6−60 | 5050 | HSJS6-50 / HSJNS6-50 | ||||
| 60120 | HSJS6−60 / HSJNS6−60 | 6060 | HSJS6−60 / HSJNS6−60 | ||||
| 3 grooved sides, 1 flat side | HFSF6 EFSF6 NEFSF6 | 3030 | HSJ6 / HSJS6 / HSJNS6 | HFSFB6 | 3030 | HSJ6 / HSJS6 / HSJNS6 | |
| 3060 | HSJ6 / HSJS6 / HSJNS6 | HFSLB6 | 3030 | HSJ6 / HSJS6 / HSJNS6 | |||
| 6060 | HSJS6−60 / HSJNS6−60 | 3060 | HSJ6 / HSJS6 / HSJNS6 | ||||
| Two-sided groove | HFSH6 EFSH6 | 3030 | HSJ6 / HSJS6 / HSJNS6 | ||||
Kinds of Blind Joint Parts
| Single Blind Joint Parts Kit | Pre-assembled frame single Blind Joint Parts type | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
|  | ||||||||
| It is used by drilling one hole in each of the two frames to be connected and connecting the frames at right angles using the grooves in the frames. | The narrow type has a modified shape so that the connection part is less likely to collide with the panel when fitting the panel into the frame groove. | This is an aluminum frame with the single Blind Joint Parts kit narrow type installed. Additional wrench holes are required on the mating frame. | ||||||||
| HSJ/HSJS | HSJNS | JFSS | ||||||||
How to Use of Blind Joint Parts
(Reference) Corner when using this Blind Joint Parts
■ Installation procedure
| procedure | Front View | Side View | Floor plan | How to specify by model number (30mm square as an example) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 |  |  | Drill a D hole in the frame. Insert the ① Blind Joint Parts nut into the frame with the D hole drilled . Pass the ③ button bolt through the ② Blind Joint Parts plate and lift it up to temporarily secure it. Pass the ② Blind Joint Parts plate through the B frame groove with the wrench hole and slideit to the underside of Ⓐ. Pass a hex wrench through the wrench hole and tighten the ③ button bolt to secure it.    |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2 |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3 |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4 |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5 |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6 |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7 |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 8 |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
■ Installation examples for each frame shape
|
| ||||||||||||||||||||||||||||
|
| ||||||||||||||||||||||||||||
|
| ||||||||||||||||||||||||||||
| Frame A | Frame B | Single Join Kit | Quantity | |
|---|---|---|---|---|
| ① | HFS6-3030-1000-LDH | HFS6-3030-800-LCV | HSJNS6 | 1 |
| ② | HFS6-6060-1000-LDH | HFS6-6060-800-LWV | HSJNS6-60 | 2 |
| ③ | HFS6-3060-1000-LDH | HFS6-3060?800-LWV | HSJNS6 | 2 |
| ④ | HFS6-3060-1000-LDH | HFS6-3060-800-LCH | HSJNS6 | 2 |
| ⑤ | HFS6-3090-1000-LDH | HFS6-3090-800-LCH | HSJNS6 | 3 |
| ⑥ | HFS6-3090-1000-LDH | HFS6-3090-800-LEV | HSJNS6 | 3 |
*For rectangular frames, place the short side down when drilling.
■ How to make the frame cap flush
The length of the aluminum frame is shortened by the thickness of the frame cap.
<Example: Single Blind Joint Parts connection: When connecting with one side 300 mm long>
*Alterations (FR/FL) for "2.5 mm thickness" are not currently supported.C
: For the frame cap thickness, specify the protruding
Blind Joint Parts model HFS6-3030-300-RCV-LCV and 300 mm long wrench holes on the left and right.D
: For the frame cap, specify the model HFS6-3030-294-RCV-LCV-FR-FL, which does not protrude and is flush with the surface
, shortened by the frame cap thickness, and specify wrench holes and wrench hole shifts on the left and right.
*Alterations (FR/FL) for "2.5 mm thickness" are not currently supported.C
: For the frame cap thickness, specify the protruding
Blind Joint Parts model HFS6-3030-300-RCV-LCV and 300 mm long wrench holes on the left and right.D
: For the frame cap, specify the model HFS6-3030-294-RCV-LCV-FR-FL, which does not protrude and is flush with the surface
, shortened by the frame cap thickness, and specify wrench holes and wrench hole shifts on the left and right.
C Frame cap pops out
D Frame caps are flush and
do not protrude
Product Comparison Information of Blind Joint Parts
If using a regular bracket would cause interference with the surrounding area, we recommend a Blind Joint Parts connection. Please refer to the table below and check the detailed specifications on the product page.
| Product name | Single Blind Joint Parts | Tapping Blind Joint Parts | Screw Blind Joint Parts | Simple Blind Joint Parts | Center Blind Joint Parts | Post-insertion double Blind Joint Parts | First-in double Blind Joint Parts | Parallel Blind Joint Parts |
|---|---|---|---|---|---|---|---|---|
| Product Photos |  |  |  |  |  |  |  |  |
| Installation Diagram |  |  |  |  |  |  |  |  |
| Material | Iron or SUS304 | SWCH-18A | Iron or SUS304 | S45C/SCM435 | SCS13 | Equivalent to SCS13/SUS304 | SUS316 equivalent / SUS304 | SCS13/SUS304 |
| Features | Since the additional D hole does not penetrate all the way to the flat surface, this is a Blind Joint Parts with particularly excellent aesthetics. | No additional tapping holes are required. This is the most inexpensive Blind Joint Parts. | The plate allows for reliable and inexpensive connection. | No additional machining of wrench holes is required, and fastening can be done in one place. | This is the most common Blind Joint Parts that can be used with a wide range of aluminium frames. | Stable fastening is possible from two points. This is the strongest fastening possible with Blind Joint Parts. | This Blind Joint Parts can be used for a variety of purposes, such as extending frames or attaching to plates. | The frames can be connected side-by-side. |
| 6 Series Product Page | Viewing | Product page | Product page | Product page | Product page | Product page | Product page | Product page |
Related Products of Blind Joint Parts 6 Series
■6 Series (groove width 8mm)
| Product name | Aluminum frame | bracket | nut | Frame cap | Groove cover |
|---|---|---|---|---|---|
| photograph |  |  |  |  |  |
| Product page | Here | Here | Here | Here | Here |