PPS Plates-Standard / Abrasion Resistance Grade

Product Description

Caution

Drawing

Brand :

MISUMI

PPS is a resin plate with excellent heat resistance, dimensional stability, and chemical resistance, and is cheaper than PEEK.

Bolt
Nominal Dia.

■ Standard Type

[ ! ]A ≥ B

Type	[M]Material / Grade	Color	Operating Ambient Temperature
NPPS	PPS / Standard	Natural Color	Ambient Temperature: Up to 190°C
NPMS	PPS / Abrasion Resistance Grade - Sliding	Blue	Ambient Temperature: Up to 220°C

[ ! ] PPS Standard Type generates an oxide film on the surface and the color turns to brown when it is exposed to light and heat (direct sunlight, fluorescent light, mercury lamp and high-temperature atmosphere) for long hours. However, it changes little in mechanical properties and physical properties.
[ ! ] The material is not filled with glass fiber.

Finish	4 Sides		Upper-Lower Surface
Finish	Machining Method	Surface texture	Machining Method	Surface texture
Circular sawing	Circular sawing		Material
Guaranteed Perpendicularity of Circular Saw Cuts (NT)	Circular sawing		Material
4-side Milling, etc. * (4F)	Milling, etc.*		Material
6-surface Milling, etc. * (6F)	Milling, etc.*		Milling, etc.*
Upper-lower Surface Milling, etc. * (2F)	Circular sawing		Milling, etc.*
[ ! ] The roughness values of the material surface are for reference only.

[M]Material: PPS (Polyphenylenesulfide)

■ Hole Machined Type

Nominal Dia.	b (Minimum Value)
3 to 10	2.5

Finish	4 Sides		Upper-Lower Surface
	Machining Method	Surface texture	Machining Method	Surface texture
Circular sawing	Circular sawing		Material
[ ! ] The roughness values of the material surface are for reference only. [M]Material: PPS (Polyphenylenesulfide)

[!] A ≥ B [!] Hole diameter/hole pitch dimensions (F/G/XC/YC) Tolerance is JIS B 0405 Intermediate.
* The hole position in dimensional outline drawing is not applicable because it is affected by the external dimensional tolerance. (Number of Holes: 2H, when selecting Alteration XC/YC)

Hole Machining Details

N (Through Hole)

Z (Counterbored Hole)

N (Through Hole) / Z (Counterbored Hole) Details

M (Threaded Insert)

■Table 1 M (Thread Insert) Details

Bolt Nominal Dia.	3	4	5	6	8	10
d	3.5	4.5	5.5	6.5	9	11
d₁	6.5	8	9.5	11	14	—
h	4	5	6	7	9	—

Ordering Code (Example) M4-L6
[ ! ]L ≤ T－1
[ ! ] When L + 5 < T, drilled holes will be blind ones.

Type	[M]Material / Grade	Color	Operating Ambient Temperature
NPPS	PPS / Standard	Natural Color	Ambient Temperature: Up to 190°C
NPMS	PPS / Abrasion Resistance Grade - Sliding	Blue	Ambient Temperature: Up to 220°C