Locating Pins - Small Flat Head (Press Fit)
Brand :
MISUMI
Caution
- The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change - Please check the content on our website as the PDF does not contain the most up-to-date information.
Product Description
Flat Head Type. Suitable if the mating side has limited space.
* The insertion guide is applicable to tolerance p6 only.
When P<3
a=0.5
d=P-0.1/p>
When P≥3
a=1.0
d=P-0.2
[ ! ]Relief dimension is a reference value.
[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]Polishing and centering hole may not be provided.
[ ! ]When D=P, relief is also applied.
| Material No. | [ M ]Material | [ S ] Surface Treatment | [ H ]Hardness | Type | D Tolerance Code | |
| P Selectable | P, L, B Configurable | |||||
| (1) | SKS3 Equivalent | - | Treated Hardness: 60~63HRC | JPDB | FPDS | C (m6) PC (p6) |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50~55HRC Plating Hardness: 750HV ~ | - | GFPDS | |
| (3) | SKS3 Equivalent | - | - | - | BFPDS | |
| (4) | SUS304* | - | - | SJPDB | SFPDS | |
| (5) | SUS304 | Hard Chrome Plating | Plating Hardness: 750HV ~ | - | - | |
| (6) | SUS440C or 13Cr stainless | - | Treated Hardness: 50~55HRC | - | CFPDS | |