Temperature Sensors - Terminal Selectable, K- / J-Thermocouple

Brand :

MISUMI

Caution

Please check the content on our website as the PDF does not contain the most up-to-date information.

Product Description

Temperature Sensors - Terminal Selectable, K- / J-Thermocouple
These Temperature Sensors are commonly used in manufacturing and automation machine
[Feature]
● Temperature Sensors : Thermocouple Type K and Type J
● Sheath, Protection Tube Diameter (mm.): 1, 1.6, 3.2 and 4.8
● Protection Tube Length (mm.): The size is configurable between 50 to 1500 mm, and the minimum length can be increased by increments 10 mm.
● Wire Length (m.): The size is configurable between 0.3 to 5 m, and the minimum length can be increased by increments 0.1 m.
● Temperature Range (°C) :
MSFK - 0 to 800 (depend on Sheath diameter)
MSFJ - 0 to 750 (depend on Sheath diameter)
MSFP - 0 to 300 (depend on Sheath diameter)
● Crimp Terminal Type:
MSFK and MSFJ - M4Y-Shaped 2 sets
MSFP - M4Y-Shaped 3 sets
[Application]
It is used in a variety of application such as heat treatment, packaging industry , plastic industry , and so on.

・Materials

MSFK, MSFJ		MSFK	MSFJ
Type of Thermocouple		K Thermocouple	J Thermocouple
Precision		JIS Class 2
Temperature Measurement Contact Point		Isolated Neutral Type
Temperature Measurement Range	Ø1.0, 1.6	0 ~ 650°C	0~450°C
	Ø3.2	0 ~ 750°C	0 ~ 650°C
	Ø4.8	0 ~ 800°C	0 ~ 750°C
[ M ]Material	Sheath	SUS316 or SUS316L
	Sleeve	SUS304
Heat Resistance Temperature of Sleeve		80°C
Lead Wire (Operating Temp. Range)		Glass Wool Coating (0 ~ 150°C)

MSFP

Type of Device		Pt100Ω
Precision		JIS Class B
Lead Type		3-lead Type
Temperature Measurement Range		0 ~ 300°C
[ M ]Material	Protection Tubes	SUS316
	Sleeve	SUS304
Heat Resistance Temperature of Sleeve		80°C
Lead Wire (Operating Temp. Range)		Vinyl Coating (-20 ~ 70°C)

More Information

[ ! ]The maximum temperature of measurement is only a value of measurement point (end of Sheath). As for the actual temperature measurement, please be careful so that the temperature of Sheath will not excel the heat resistance temperature (80°C). It might cause disconnection because of the swell caused by heat inside the sleeve.
Especially when a heated object temperature exceeds 100°C, a long type of sheath L length is recommended, which is used to put maximum distance between the sleeve and the heated object, or Temperature Sensor, Heat Resistant Type (P.1656) is recommended.