For 5 Series (Slot Width 6mm) - Post-Assembly Insertion - Lock Nuts with Leaf Springs
Caution
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Product Description
The leaf spring is welded to the lock nut. Because positioning can be done easily, it is convenient for places where panels and covers are frequently removed.
Dimensional Drawing of Nuts
Single item model Nuts | Pack Type Nuts | |
| HNTRP5(S10C equivalent) SHNTRP5(SUS304) | PACK-HNTRP5(Pack of 100) PACK-SHNTRP5(Pack of 100) |
| Reference tightening torque (N・m) |  | ||
| M | Equivalent to S10C/SUS304 | ||
| 5 | 6.8 | ||
| Type | [M] Material | ||
| Main unit | Wings | [S] Surface Treatment | |
| HNTRP5 | Equivalent to S10C | SUS304 | Trivalent Chromate |
| PACK-HNTRP5 | |||
| SHNTRP5 | SUS304 | SUS304 | − |
| PACK-SHNTRP5 | |||
Specification Table of Nuts
| Model Nuts | − | M |
| HNTRP5 | − | 5 |
| PACK-SHNTRP5 | − | 5 |
| Reference tightening torque (N・m) | |
| M | Equivalent to S10C |
| 5 | 6.8 |
・To check the latest price, please click the "Check Price" button after confirming the model number.
| Model Nuts | M (medium) | accessories |
| HNTRP5 | 5 | M4 for locking |
| 1 set screw | ||
| SHNTRP5 | 5 | M4 for locking |
| 1 set screw |
. The price list below is currentas of April 2011.
To check the latest price, please click the "Check Price" button after confirming the model number.
| Model Nuts | M (medium) | accessories |
| PACK-HNTRP5 | 5 | M4 for locking |
| 1 set screw | ||
| PACK-SHNTRP5 | 5 | M4 for locking |
| 1 set screw |
Specifications/Overview of Nuts
- The leaf spring is welded so the Nuts will not fall off even if the frame is held vertically.
- In addition, a set screw is included so that the nut itself can be fixed.
- This is effective in places that require high repeatability, such as when installing sensors or repeatedly removing panels.
Bolts for Attaching Various Aluminum Frames and Panels/Brackets (M size - L size) of Nuts
| Groove Width | Frame angle | Depth h | Compatible Nuts | Thickness b (mm) of the panel/bracket to be attached to the frame | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.8 | 1 | 1.2 | 1.5 | 2 | 3 | 4 | 4.5 | 5 | 6 | 8.2 | 9 | 10 | 12 | 14 | ||||
| 6 | 20 | 6 | 5-3 | M3-6 | M3-8 | M3-10 | M3-12 | M3-15 | M3-18 | |||||||||
| 5-4 | M4-6 | M4-8 | M4-10 | M4-12 | M4-15 | M4-18 | ||||||||||||
| 5-5 | - | M5-8 | M5-10 | M5-12 | M5-15 | M5-18 | ||||||||||||
How to Use of Nuts
This product is a post-insertion nut. It can be installed from the groove after assembly.
vertically without slipping off .
by tightening the included set screw .
Selection Support Information of Nuts
■ Compatible series of Nuts
This product is compatible with Misumi 5 series (slot width 6 mm) aluminum frames.
5 Series
■ Difference between first-in and last-in of Nuts
・MISUMI aluminum frame Nuts are available in a variety of types, including first-in and last-in. Use them according to your needs.
First-in: Install from the groove end face before assembly. They are wide and have little play inside the groove, making bolt tightening easy.
Post-insertion: Can be installed through the groove after assembly.
■ If the aluminum frame becomes stuck and cannot be removed
To remove the Nuts, hook the hex wrench into the hole in the nut and turn it at right angles to the groove.
5 Series Related Parts of Nuts
| Product name | Aluminum frame | bracket | Blind Joint | Frame cap | Groove cover |
|---|---|---|---|---|---|
| photograph |
|
|
|
|
|
| Product page | Here | Here | Here | Here | Here |
Example
