6 Series (Groove Width 8 mm) Lock Nut With Post-Assembly Insertion Leaf Spring for 30/60 Square Aluminum Extrusions

Dimensional Drawing of Nuts

Single item Nuts model		Pack Nuts Type
HNTRP6 (S10C equivalent) SHNTRP6 (SUS304)		PACK-HNTRP6 (S10C equivalent, pack of 100) PACK-SHNTRP6 (SUS304, pack of 100)

 

Reference tightening torque for Nuts (N・m)
M	Equivalent to S10C/SUS304
6	11.7

Specification Table of Nuts

Specifications Overview of Nuts

• The leaf spring is welded so the Nuts will not fall off even if the frame is held vertically.
• In addition, a set screw is included so that the Nuts itself can be fixed.
• This is useful in locations where panels or covers need to be removed frequently.

Technical Information for Nuts

The Nuts are Used with Bolts for Attaching Various Aluminum Frames and Panels/Brackets (M size - L size)

How to Use of Nuts

This product is a post-insertion Nuts. It can be installed from the groove after assembly.

The leaf springs are welded in place,
allowing for easy positioning
even when the frame is vertical,
without slipping off .

You can also fix
the Nuts in place by tightening
the included set screw .

Selection Support Information for Nuts

■ Compatible series

This Nuts product is compatible with Misumi 6 series (slot width 8 mm) aluminum frames.

6 Series

 

■ Difference between first-in and last-in

・MISUMI aluminum frame Nuts are available in a variety of types, including first-in and last-in. Use them according to your needs.
First-in: Install from the groove end face before assembly. They are wide and have little play inside the groove, making bolt tightening easy.

Post-insertion: The Nuts Can be installed through the groove after assembly.

■ If the aluminum frame becomes stuck and cannot be removed

To remove the Nuts, hook the hex wrench into the hole in the nut and turn it at right angles to the groove.

Nuts 6 Series Related Parts

Example