Anchors for Aluminum Frames - 4-point Anchor/2-point Anchor - SPHC

Brand :

MISUMI

Caution

Product Description

Anchors for Aluminum Frames - 4-point Anchor/2-point Anchor
These anchors for aluminum frames are commonly utilized to assemble aluminum extrusions.They are designed for aluminum extrusions from the MISUMI brand.
[Feature]
- Body Height (mm.) : 146
- Applicable For Aluminum Extrusions Series :
4-point Anchor Type : HFS6-3030 and HFS6-3060
2-point Anchor Type : HFS8-4040 and HFS8-4080
- Material : SPHC
- Surface Treatment: Trivalent Chromate
[Application]
It can be used to make the safety fence unit stand straight

Dimensional Drawing of Adjuster Pads

[M] Adjuster Pads Materia : SPHC
[S] Adjuster Pads Surface treatment : Trivalent chromate
[!] The inner surface of the cylinder is deep, so the surface treatment isapplied thinly.

Specification Table of Adjuster Pads

Model

HFTANK6-3030

■ Adjuster Pads 4-point anchor type
・The Adjuster Pads price list below is current as of April 2011.
・After confirming the model number, please click the "Check Price" button tocheck the latest price.

Adjuster Pads Model		Compatible frames (series)	Mass (g)	A	W	V	Applicable set screws ( )		Required number of anchor bolts
							Set screw	Quantity
HFTANK6	3030	6 series 30mm square	1350	150	31	−	MSSF6-12	4	4
	3060	6 series 30mm square ^* , 30 and 60mm square	1650		62	31	MSSF6-12	6
HFT ANK8	4040	8 series 40mm square	1900	170	41	−	MSSF6-16	4
	4080	8 series 40mm square ^* , 40/80mm square	2210		82	41	MSSF6-16	6

■ Adjuster Pads 2-point anchor type
・The Adjuster Pads price list below is current as of April 2011.
・After confirming the model number, please click the "Check Price" button tocheck the latest price.

Adjuster Pads Model		Compatible frames (series)	Mass (g)	A	W	V	Applicable set screws ( )		Required number of anchor bolts
							Set screw	Quantity
HFTANM6	3030	6 series 30mm square	800	150	31	−	MSSF6-12	4	2
	3060	6 series 30mm square ^* , 30 and 60mm square	1000		62	31		6
HFTANM8	4040	8 series 40mm square	1100	170	41	−	MSSF6-16	4
	4080	8 series 40mm square ^* , 40/80mm square	1400		82	41		6

*When using two aluminum frames, reinforce them with sheet metal. (See theHow to Use.)
[ ! ] Applicable set screws are not included.

Additional Processing of Adjuster Pads

Model	−	(SET)
HFTANK6-3030	−	SET
HFTANK8-4040	−	ETA

Alteration	Code	Spec. of Adjuster Pads	Applicable set screw	Applicable anchor bolt (M12)
Alteration	Code	Spec. of Adjuster Pads	bolt	Core rod driving type
Applicable bolts and nuts included	SET	A set of set screws to secure the stand and frame is included .	MSSF	-
Set of applicable bolts, nuts and anchor bolts	ETA	A set of set screws and anchor bolts to secure the stand and frame is included .	MSSF	Rod-driven anchor bolt (iron)

[ ! ] The following anchor bolts are included :
Core rod driving type (iron) : Sanko Techno C-1210
[!] About the installation of the anchor bolts
If this product is not used and installed correctly, it will not function asexpected (including safety). Please install it correctly at your own risk. We recommend
that installation using this product be carried out by a qualified person asspecified by the Japan Consolidated Anchor Association (JCAA).
[ ! ] About the specifications and uses of the anchor bolts
This product is intended for use in fixing safety fences as specified by ourcompany.
If you wish to use it for other purposes, please check the strength andfunctions, etc. and use it at your own risk.
We are not responsible for the installation using this product or for any useother than the purposes specified by our company.
*For more information on this product, please click here .

How to Use Adjuster Pads

・If you are using a stand to hold two aluminum frames upright, please reinforce them with
a metal plate.

-Can be attached with a set screw
without using nuts for aluminum frames .

-Can be used to stand the safety fence unit upright.

Anchor Related Products for Adjuster Pads

Product Name	(This product) Adjuster Pads 4-point anchor type/2-point anchor type	Adjuster Pads	Adjuster Pads	Adjuster Pads Heavy Type	Adjuster Pads sheet metal type
Photograph
Type	HFTANK6, HFTANK8, HFTANM6, HFTANM8	HFSANK, HFSANKW	HFDANK	HFANK, HFANK	HFLANK, HFLANB
Material (surface treatment)	SPHC (trivalent chromate)	SPHC (chromate)	ADC12 (none)	S25C (black baked paint)	SS400 (trivalent chromate, black oxide film)
Supported Frames	6 series (only 30mm square and 60mm square) 8 series (only 40mm square, 40 and 80mm square)	6,8 series	6,8 series	6,8,8-45 Series	6 series (only 30mm square and 60mm square) 8 series (only 40mm square, 40 and 80mm square)