Aluminum/Stainless Steel Safety Door Switch

Brand :

MISUMI

Caution

Product Description

[Features]·A safety door switch. [Material]·A6063, SUS304.

Dimensional Drawing of Catches and Locks

HSWCA(Contact method 1NO/1NC)
HSWCC(contact method 3NC)		Component Details
①Main unit	② Actuator	③Main unit mounting bracket

		[M]Catches and Locks Material A6063
		④Main unit mounting bracket

		[M]Catches and Locks Material SUS304

*Do not tighten or loosen the conduit.
*When wiring, take care not to allow water, oil, etc. to get in from the end of the cable.
*The cable length is 1000mm. *One dustproof cap is included.
*Of the two actuator insertion ports, cover the unused one with a dustproof cap to protect internal components and Catches and Locks.
*The resin stopper is a part used to position the actuator and should be removed after fixing. Ensure Catches and Locks are not obstructed during this process.
*Recommended tightening torque for main body/actuator mounting bolts: 1.0 to 1.5 N・m

Main unit frame	Actuator side frame	A	B	C	D
5 Series 20mm square	5 Series 20mm square	46	19	41.4	14.5
6 series 30mm square		36	27	31.4	19.5
8 series 40mm square		26	34	21.4	24.5
8-45 series 45mm square		twenty one	34	16.4	27
6 series 30mm square	6 series 30mm square	46	31	41.4	24.5
8 series 40mm square		36	40	31.4	29.5
8-45 series 45mm square		31	40	26.4	32

Specification Table of Catches and Locks

Catches and Locks Model

HSWCA6

・The price list below is currentas of April 2011.
・To check the latest price, please click the "Check Price" button after confirming the model number.

Catches and Locks Model

Body mounting side

Actuator
mounting side

Accessories

Type

No.

Main unit mounting frame side

Actuator mounting door side

Body mounting bracket

⑤Bolt

Quantity

⑥ Nut

Quantity

⑦Main body mounting bolts

Quantity

⑧Bolt

Quantity

⑨ Nut

Quantity

HSWCA
HSWCC

5 Series 20mm square

Panel
(3mm or 5mm)

③

SCB4-8

HNTASN5−4

SCB4-18

SCB4-12

SLBNR4

6 series 30mm square

Panel
(3mm or 5mm)

SCB4-10

HNTASN6−4

8 series 40mm square
8-45 series 45mm square

Panel
(3mm or 5mm)

SCB4-12

HNTASN8−4

5-5

5 Series 20mm square

④

SCB5-8

HNTASN5−5

SCB4-15

SCB4-10

HNTFSN5-4

6-5

6 series 30mm square

SCB5-10

HNTASN6−5

8-5

8 series 40mm square

SCB5-14

HNTFSN8-5

845−5

8-45 series 45mm square

SCB5-15

6-6

6 series 30mm square

SCB5-10

HNTASN6−5

SCB4-12

HNTFSN6-4

8-6

8 series 40mm square

SCB5-15

HNTFSN8-5

845−6

8-45 series 45mm square

Overview and Specifications of Catches and Locks

■ Catches and Locks rating

Rated insulation voltage (Ui)			300V
Rated current (lth)			2.5A
Rated operating voltage (Ue)			30V	125V	250V
Rated operating current (le)*	alternating current AC	Resistive load (AC-12)	-	2.5A	1.5A
	alternating current AC	Inductive load (AC-15)	-	1.5A	0.75A
	direct current dc	Resistive load (DC-12)	2.5A	1.1A	0.55A
	direct current dc	Inductive load (DC-13)	2.3A	0.55A	0.27A

[ ! ]Minimum applicable load (reference value) = AC/DC 3V, 5mA
(The usable range may vary depending on the conditions of use and the type of load.)
*Safety standard certification ratings C300: AC-15 0.75A/240V Q300: DC-13 0.27A/250V

■Catches and Locks Performance specifications

Applicable standards		ISO14119, EN1088, IEC60947-5-1, EN60947-5-1 (DEMKO certification), GS-ET-15 (BG certification), UL508 (UL listing certification), CSA C22.2 No.14 (c-UL listing certification)
	Application standards	IEC60204－1/EN60204－1
Applicable directive		73/23/EEC (Low Voltage Directive)
Standard use condition		Ambient temperature during use: -25 to 70°C (but do not freeze) Relative humidity: 45 to 85% (but do not condense) Ambient storage temperature: -40 to 80°C (but do not freeze; protect Catches and Locks from extreme cold) Operating environment: Pollution level 3 (ensure Catches and Locks are suitable for this condition)
Impulse withstand voltage		4kV
Insulation resistance		Between live and non-live parts: 100MΩ or more (at DC500V megger) Between live parts of different polarities: 100MΩ or more (at DC500V megger)
contact resistance		300mΩ or less (initial value, for 1m cable length)
Electric shock protection class		Class II (IEC61140)
protective structure		IP67 (IEC60529)
Shock Resistant		Malfunction: 300m/s²Durability: 1000m/s²
Vibration resistance		Malfunction: 5 to 55Hz, single amplitude 0.5mm or more Durability: 30Hz, single amplitude 1.5mm or more
Actuator Operation Speed		0.05 to 1.0 m/s
Direct opening stroke		8mm or more
Direct opening force		Over 60N
Operation Frequency		1200 times/hour
mechanical durability		Over 1,000,000 times (GS-ET-15)
Electrical Durability		100,000 times or more (operation frequency 1200 times/hour, load conditions: AC-12 250V 1.5A, DC-12 250V 0.2A)
Conditional Short Circuit Current		50A (250V) (Note)
Body color		black
cable		UL2464 No.20 AWG (6-core)
mass		Approximately 120g (HSWCC main unit)

Note: Use a 250V/10A fast acting heater as a short circuit protection device.

■ Contact configuration and operating characteristics

Type	Contact Configuration	Operating characteristics
HSWCA	1NC-1NO
HSWCC	3NC	: Contact ON (Close) : Contact OFF (Open)

Identify the wire core by the color of its insulation and the white line.

No.	Insulation Color	No.	Insulation Color
1	orange/white	4	tea
2	blue/white	5	blue
3	Brown/White	6	orange

Safety Precautions
･ Always turn off the power before installing, removing, wiring, and performing maintenance and inspection.
There is a risk of electric shock and fire.
･ If a relay is placed between the safety switch and a load that involves dangerous operation,
use a safety relay or other device to duplicate the relay depending on the degree of danger.
In the case of a normal relay, safety may be compromised by gluing the contacts.
･ Do not place a programmable controller (PLC) between the safety switch and a load that involves dangerous operation
. Safety may be compromised due to a malfunction of the PLC.
･ Never disassemble, modify, or intentionally disable the safety switch, catches and locks. This
may cause a breakdown or accident.
･ Install the actuator in a location where it will not come into contact with the body when the door is opened or closed. There is a risk of injury.

Precautions for Use
･ Do not use the safety switch or catches and locks as a door stopper, regardless of the type of door.
Provide a mechanical door stopper at the end of the door to prevent excessive force from being applied to the safety switch.
･ Do not subject the safety switch and catches and locks to excessive shocks by opening and closing the door roughly, etc. If
the safety switch is subjected to an impact of 300 m/s2 or^more, it may break down.
- If the safety switch is used in a location with a lot of foreign objects or dust, use a protective cover to
prevent foreign objects, dust, etc. from entering the safety switch or catches and locks through the actuator insertion opening.
If a large amount of foreign objects, dust, etc. gets into the safety switch, it may affect the mechanical parts and cause a breakdown
. - Avoid
storing the safety switch in dusty or humid locations, locations where organic gases are present, or locations exposed to direct sunlight .
- Operating the safety switch with an actuator other than that designed specifically for the safety switch or catches and locks may cause the switch to be damaged.