Ball Splines - Both Ends Tapped
Brand :
MISUMI
Caution
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Product Description
This is the least expensive ball spline suitable for fixation using shaft holders, etc., or for incorporating into plates. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.
| Both Ends Tapped | Spline Shafts [ M ] SUJ2 Equivalent Nut [ M ] SCM415 Equivalent [ H ] Hardness: 58HRC~ | Spline Shaft, Nut [ M ] Material: SUS440C Equivalent [ H ] Hardness: 55HRC~ | |
| Nut 1 pc. | Nut 2 pcs. | Nut 1 pc. | |
| With Round Flange Nut | BSHM | BSH2M | BASBFS |
| With Compact Flange Nut | BSHN | BSH2N | - |
| With Straight Nut | BSHS | BSH2S | BASBSS |
More Information
