Alterations

Part Number	—	(P·SET·SST·SEU·SSU·SEP·SSP)
HBLSD6	—	P
HBLSS6	—	SET
HBLST5	—	P − SET

Alterations

Code

Spec.

Applicable Bracket

Applicable Screws and Nuts Set
Nuts Set

SET
SST
(Stainless Steel)
SEU
(Pre-Assembly Insertion
Spring Nuts)
SSU
(Pre-Assembly Insertion
Spring Nuts
Stainless steel)
SEP
(Post-Assembly Insertion
Spring Nuts)
SSP
(Post-Assembly
Spring Nut
Stainless steel)

Applicable screws and nuts for fixing the bracket to an extrusion come as a set.
　
Example: When HBLSS6 is specified

	Screws		Nut
Code	Part Number	Quantity	Part Number	Quantity
SET	CBM6－12	2	HNTT6－6	2
SST	SCB6－12		HNTTSN6－6
SEU	CBM6－12		HNTU6－6
SSU	SCB6－12		SHNTU6－6
SEP	CBM6－12		HNTP6－6
SSP	SCB6－12		SHNTP6－6

[ ! ]When specifying other than HBLSS6,
　

—

HBLSS6

HBLSSB6

HBLSD6

HBLSDB6

HBLST6

HBLSD6－50

HBLSP6

HBLBL6

[ ! ] Screws for black anodized brackets are made of HCBMTB (Trivalent Chromate Black).
[ ! ] Included Screw is not RoHS compliant when -SET, -SEU or -SEP is specified for any bracket other than black anodized ones.

Alterations	Code	Spec.	Applicable Bracket
Thin Brackets Thin Bracket Hole Position	P	Thin Brackets Changes the screw-mounting hole positions for HBLSD6.	HBLSD6

Alteration Details

■Set of applicable Screws and Nuts Details

Alteration Part Number	Screws		Nut
Alteration Part Number	Part Number	Material	Type	Part Number	Material	Stopper
SET	CBM6-12	Steel	Pre-Assembly	HNTT6-6	Steel	Not Provided
SST	SCB6-12	Stainless Steel	Pre-Assembly	HNTTSN6-6	Stainless Steel	Not Provided
SEU	CBM6-12	Steel	Pre-Assembly	HNTU6-6	Steel	Provided
SSU	SCB6-12	Stainless Steel	Pre-Assembly	SHNTU6-6	Stainless Steel	Provided
SEP	CBM6-12	Steel	Post-Assembly	HNTP6-6	Steel	Provided
SSP	SCB6-12	Stainless Steel	Post-Assembly	SHNTP6-6	Stainless Steel	Provided

■Thin Brackets Hole Position Alteration Type (-P)

Changes the screw-mounting hole position for Thin Brackets.
Hole position changed: HBLSD6 (2 hole type) only

6 Series (Slot Width 8 mm), Thin Brackets: Related Image

Points:
(1) Since the screws do not interfere with each other, each of the bracket side faces can be easily assembled vertically with the mating extrusion side face through the extrusion slot.

(2) Low-cost, thin brackets enable space saving at the installation area. 　

App. Example

■Features of HBLSD6-P (with "Thin Bracket Hole Position" Alteration applied)
Brackets with staggered screw mounting holes.
Since the screws do not interfere with each other, each of the bracket side faces can be easily assembled vertically with the mating extrusion side face through the extrusion slot.

Product Name	Part Number Example
Thin Brackets	HBLSS6-SET
Aluminum Extrusion	HFS6-3030

Product Name	Part Number Example
Thin Brackets	HBLSD6-P-SET
Aluminum Extrusion	HFS6-3030
Aluminum Extrusion	HFS6-3060

Customers' Opinions

This bracket has expanded the choice of fastening method.
I would like to buy it again because the price is lower than similar products from other manufacturers.
Because if its thin shape, the appearance of the tightening section is neat. I am satisfied with that.

Similar Products

■6 Series (Slot Width 8 mm) - For 1 Slot, Extruded Brackets

Product Name	Thin Brackets	Thick Brackets	Ultra Thick Brackets	Thick Brackets / Triangle Brackets	Offset Brackets	Unequal Sided Brackets	Brackets for Connecting Different Sizes of Extrusions 　 Brackets
Product Photo
Features	The brackets do not protrude from extrusion widths when used to cross connect extrusions. Suitable for use in limited space.	Made of the same material as aluminum extrusions with anodizing. Suitable when appearance well balanced with the extrusions is desired.	Numbers of screws are the same as those of thick brackets. Extrusions can be connected more securely.	Two mounting holes are provided on one side. Extrusions can be connected more securely with 4 screws.	Hole positions are offset. Can be combined with plates of 3 mm and 5 mm thickness when mounting plates on the side.	The vertical and horizontal lengths are unequal to each other. Usable where space is narrow.	Staggered mounting holes. Brackets to connect 20 and 30 square, 40 and 30 square Extrusions.
Allowable Load	980/1568/2352	1176	1176	1764	1176	1470	—
Representative models	This Product	HBLTS6	HBLUS6	HBLTSW6 (Thick Type)	HBLTH6	HBLTF6	HBLTS6-5L
Representative models	HBLSP6 (Tabbed)	HBKTST6 (Perpendicularly Machined)	HBKUS6 (Perpendicularly Machined)	HBLDSWT6 (Triangle)	HBLTH6	HBLTF6	HBLTS8-6L

Technical Information

■How to Specify Allowable Load of Bracket

Thin Brackets For 6 Series (Slot Width 8 mm) Related Image 1_Technical Information

This represents the allowable load per bracket for the extrusion assembly structured by bridging a beam extrusion between two vertical extrusions and then, attaching a bracket just below the bottom face of each end of the beam extrusion.
Allowable Load here means the load under which the bracket can stays at its position (without fracturing or sliding), after all of its mounting holes are fixed with screws.

■Perpendicularity

Perpendicularity of Extruded Brackets is manufactured within ±1° tolerance based on JIS Standard H4100 Special Grade.

■Mechanical Properties of Aluminum Extrusions (JIS standard as reference)

Material (JIS Symbol)	A6N01SS-T5
Tensile Strength (N/mm²)	245 or more
Yield Stress (N/mm²)	205 or more
Young's Modulus (N/mm²)	69972
Brinell Hardness (HB)	88
Surface Treatment	Anodize 9 µm or more

Type	[M] Material	[S] Surface Treatment
HBLS□6	A6N01SS−T5	Anodize
HBLS□B6		Black Anodize
HBLSD6−50		Anodize

Low Profile Bracket - 6 Series, 8mm Groove

Caution

Product Description