Flat Belt Conveyor SV Series - With Meandering Prevention Crosspiece, Head Drive, 2-Groove Frame (Pulley Dia. 30mm)

Brand :

MISUMI

Caution

Items with L Length longer than 2,000mm will be treated as special delivery from 01/11/02019,
and additional cost RM2,772.70 will be added in each product for the delivery fee. For items L Length shorter than 2,000mm will not have any price increase

Product Description

Panasonic and Oriental Motor cannot be selected as of now for motor selection due to unstable supply.

Specifications

Part Number	-	B	-	L	-	Motor							-	Belt Specification	-	Motor Manufacturer

						Output	-	Voltage	-	Specification	-	Gearhead Reduction Ratio
SVKA	-	100	-	1000	-	25	-	TA115	-	IM	-	25	-	H	-	C

Part Number

L
5mm Increment

Motor

Belt Specification

Motor Manufacturer
[ ! ]The prices vary by manufacturer.

Output (W)

Voltage (V)

Specification

Gearhead Reduction Ratio

SVKA

50
100
150
200
250

300~3000

6
25

TA115
(Single-Phase)
TA220
(Single-Phase)

IM
(Induction Motor)
SCM
(Variable Speed Motor)

5
18
60
150

7.5
25
75
180

9
30
90

12.5
36
100

15
50
120

H (General Purpose, Green)
W (General Purpose, White)
G (For Sliding, Green)
S (For Sliding, White)
D (For Electronic Parts Transfer)
F (For Food Transfer)
O (Oil Resistant)
N (Non-adhesive)
J (No Belt)

*For motor manufacturer B, please select from
the "Belt specifications" in the table below.

AS (Sumitomo Heavy Industries
B (Oriental Motor)
C (Taiwanese Motor)

*C may result in a 20% decrease
in conveying speed.

SA220 (3 Phase)

IM (Induction Motor)
INV
(Induction Motor + Inverter)

[ NG ]5~9 not applicable for 6W Motor

6
25

NV (No Motor)

NM (No Motor)

NH (No Gearhead)

R (No Motor, Gearhead)

[ ! ]Rotating direction of the belt is the same as motor rotating direction when gear ratio is 25 or less, and the opposite when gear ratio is 30 or more. [ ! ]For connection diagram and inverter details, see P.1091~ . [ ! ]For Flat Belt details, see >>P.1097.
[ ! ]When "No motor, gearhead" is selected, motor mounting hole pitch will vary depending on the motor's power rating. Please see "Technical Information" in "Conveyor Selection Site" for the dimension details.
[ ! ]When "No motor, gearhead" is selected, this unit will be delivered unassembled. Customer is to assemble the unit according to the included assembly instructions. See "Conveyor Selection Site" for assembly procedures and packaging details.

[ ! ] Please wire the motor so that the belt rotates in the standard conveying direction. For details on the wiring diagram, motor and inverter, please see >> here . [
! ] If you select a model without a motor and gear head, the motor mounting hole pitch will vary depending on the motor output. For details, please see the "Technical Information" section of the "Conveyor Selection Site" >> here .
[ ! ] If you select a model without a motor and gear head, the machine will be delivered in a parts state. You will need to assemble it yourself according to the assembly instructions included. For the packaging state , please see the "Conveyor Selection Site" >> here .
[ ! ] Please note that the meandering prevention bar belt may warp depending on the number of plies (thickness).
[ ! ] The speed control motor does not come with a mounting bracket for the speed controller. If you would like a bracket for the speed controller, please select the additional processing [SCB].
[ ! ] If you would like to purchase the bracket for the speed controller separately, please enter the model number [P1-JTEA-12049072] in the WOS to purchase it.
[ ! ] Regardless of the belt specifications, tilting the machine is not recommended.
[ ! ] Mitsubishi inverters are delivered not attached to the conveyor. [
! ] Customers must prepare mounting brackets for Mitsubishi inverters.
[ ! ] Customers must install CC-Link cards for CC-Link compatible Mitsubishi inverters.
[ ! ] Customers must prepare CC-Link cables for CC-Link compatible Mitsubishi inverters.
[ ! ] CC-Link is a registered trademark of Mitsubishi Electric Corporation.

Belt specifications	Standard belt	Optional belt 1	Optional belt 2	Without belt
For general use	H (green)　W (white)	−	−	J (without belt)
For sliding	G (green)　S (white)	−	−
For inclined transport	−	−	−
Grip Specifications	−	−	GG (green) 　GW (white)
Oil-resistant specifications	O (Green)	OW (White)	−
Non-adhesive specification	N (White)	NB (Sky Blue) 　NBG (Lime Green) HH (Green) 　HW (White)	−
For food transport	−	KW (white) 　KSB (sky blue) 　PHB (sky blue)	−
For transporting electronic parts	D (Black)	−	−

[ ! ] For details on flat belts, see >> here
[ ! ] For motor manufacturer AS (motors manufactured by Sumitomo Heavy Industries) and motor manufacturer C (motors manufactured in Taiwan), select from H, W, G, S, D, F, O, N or J (no belt).
[ ! ] For motor output of 6W, select from belts with a thickness of 1.0mm or less.
[ ! ] Oil-resistant belts cannot be used in environments where oil may adhere to the backside.
[ ! ] Belt length calculation formula: (2L+97) / 1.002 / 1000 Rounded to the third decimal place Unit: m (L = length between pulleys)

Speed control motor model number

Motor			Oriental Motor		Taiwanese motor		Sumitomo Heavy Industries
			Motor Model Number	Gearhead model number *□ indicates reduction ratio		Gearhead model number *□ indicates reduction ratio			Gearhead model number *□ indicates reduction ratio
					Motor Model Number		Motor Model Number	Controller Model Number
output	specification	Voltage
6W	Speed Control Motor	Single phase 100V	US206-401	2GN□S	PACMSV-UT60-W6-V100	PACMGXT60-□	A6U06A	CAU06A	G6 D
		Single phase 200V	US206-402		PACMSV-UT60-W6-V200		A6U06C	CAU06C
25W	Speed Control Motor	Single phase 100V	US425−401	4GN□S	PACMSV-UT80-W25-V100	PACMGXT80-□	A8U25A	CAU25A	G8□D
		Single phase 200V	US425−402		PACMSV-UT80-W25-V200		A8U25C	CAU25C
remarks			[ ! ] The speed control motor includes the following: Motor, speed control unit, speed control mounting screws, instruction manual		[ ! ] The speed control motor includes the following: Motor, speed control unit . [ NG ] The motor cable of the speed control motor cannot be extended.		[ ! ] To use with a speed controlled motor, both the motor and the controller must be ordered.

Extension connection cable for Oriental Motor speed control motor (sold separately)

Motor	Extension connection cable model number
output	length	Single phase 100V, single phase 200V	Single phase 110V, single phase 115V
			Single phase 220V, single phase 230V
6W	1m	CC-1	CC01SU05
25W	2m	CC-2	CC02SU05
	3m	CC-3	CC03SU05
	4m	CC-4	CC04SU05
		- The maximum cable extension distance that can be extended is 4m.	- The maximum cable extension distance that can be extended is 10m.

Extension connection cable for Sumitomo Heavy Industries speed control motor (sold separately)

Motor	Extension connection cable model number
output	length	Single phase 100V, single phase 200V

6W 25W	1m	EAWE10
	2m	EAWE20
	3m	EAWE30
	4m	EAWE40
		- The maximum cable extension distance that can be used is 4m.

[ ! ] The motor cable of the Taiwanese speed control motor cannot be extended.

Inverter specifications

specification	INVM	INVC
Manufacturer	Mitsubishi Electric Corporation	Mitsubishi Electric Corporation
Model	FR-D720-0.1K	FR-E820-0.1K
Model	FR-D720-0.1K	*CC-Link card: FR-A8NC-EKIT included
power supply	Three-phase 200V	Three-phase 200V
remarks		CC-Link communication compatible

Additional processing

Alteration
code

Additional work details

Applicable conditions

Example

Motor position opposite

The motor position can be changed.
Only head drive type can be specified.
<Specifying method>: MK

[ ! ] For some models, adding MK will also change related parts.

SVKB-100-1000-25-
T100-IM-25-HC-MK

FYA
FYB

Additional counterbore holes

Head Drive

Additional countersink holes for inserting nuts are drilled into the front and rear frames.

<How to specify>: FYA300
FYA300-FYB600

Compatible conveyors	FYA・FYB
SVKA・SVKB	150≦FYA・FYB≦(L-105)

[ ! ] FYA · FYB = specified in 5 mm increments
[ ! ] FYB - FYA ≧ 15
[ ! ] The specified range is as shown in the table on the left.

SVKB-100-1000-25-
T100-IM-25-HC-FYA50

SCB

Bracket for speed controller included
(also applicable to brushless motor controllers)

①Speed controller bracket

A mounting bracket for the speed controller is included.
<How to specify>:
Compatible with controllers from Sumitomo Heavy Industries, Oriental Motor, and Taiwanese motors.

[ ! ] Two bracket mounting screws included

[ ! ] Two controller mounting screws (M4x8) included

[ ! ] Depending on the conveyor, it may not be possible to install it due to space limitations.

[ ! ] The bracket shape varies depending on the conveyor model and motor specifications.

SVKB-100-1000-25-
T100-IM-25-HC-SCB

Motor cover with window

Head Drive

Intermediate Drive

The motor cover can be changed to a type with a window.
<How to specify>: CW

[ ! ] Resin plates can also be purchased separately for maintenance. Click here
for details .

SVKB-100-1000-25-
T100-IM-25-HC-CW

ANT□

Post-insertion nuts included

Includes post-insertion nuts for Misumi conveyor frame grooves.
Material: SUS316 equivalent, sintered
<How to specify>: ANT5-Q8-4

[ ! ] Click here for details on post-insertion nuts

Code	Nut quantity Q	M	Accessory (1 piece) Set screw	A	B	T
ANT5 (for M5 groove)	4 8 12	3 4	M4×5	4.9	7	4
ANT6 (for M6 groove)	4 8 12	3 4 5	M4×6	5.9	8	4.5

SVKB-100-1000-25-
T100-IM-25-HC-ANT5-Q8-4

TBM

Motor with terminal box
■Oriental specifications

Change the induction motor to a type with a terminal box.
<How to specify>: TBM

[ ! ] Only Oriental specifications can be selected.
*Products delivered on the 5th day will have an additional 3 days delivery time.

SVKB-100-1000-25-
T100-IM-25-HC-TBM

Alteration
code

Conveyor stand added

Applicable conditions

Example

NA□

■Conveyor stand I type
belt width ≦140mm
(adjustable bolt type, stand base + reinforcement material)

*1 D dimension correspondence table

B	30–80	90～140
D	200	280

[ ! ] B is belt width

Add a conveyor stand to the conveyor.
<How to specify>:
NA1-H750-PN
WA3-H1200-P400

[ ! ] Bolts and nuts that match the groove size of the conveyor body are included.

[ ! ] If the machine length between pulleys L dimension ≧ 1000 (GV series: L dimension ≧ 1400), we recommend installing two or more stands.

[ ! ] This specification includes one conveyor stand with the dashed dotted line part (□-1) added.

[ ! ] Delivery time is the same as the standard delivery time for conveyors.

		①Bracket	②Aluminum frame	③Adjusting bolt	④Aluminum frame
[M] Material	NA	SUS304	Aluminum Material	steel	Aluminum Material
	W.A.	steel
[S] Surface Treatment	NA	2B	Anodizing	Trivalent Chromate	Anodizing
	W.A.	Trivalent Chromate
		⑤Bracket	⑥ Support plate	⑦Foot base
[M] Material	NA	Aluminum Material	steel	-
	W.A.			steel
[S] Surface Treatment	NA	Anodizing	Trivalent Chromate	-
	W.A.			Trivalent Chromate

■NA□・WA□Installation Dimensions Table

Compatible Models	C	XY
SVKA・SVKB	21	B+41
SVKN/SVKR	21	B+41

*B is the belt width, C is the dimension to the conveying surface
*The mounting point is the dimension assuming the lower groove

Code	Number of stands	Height H	Pitch P
NA WA	1	300～ 1300	300～ 2000
	2
	3
	4

[ ! ] H and P dimensions can be specified in 10mm increments

[ ! ] If □=1, ④ aluminum frame and ⑤ bracket are not included.

[ ! ] If □=1, it will not stand on its own.

[ ! ] If □≧2 and ④aluminum frame is not required, please order CSTS or CSTW separately instead of this additional modification.
( Here , and here )

[ ! ] The stand will be shipped in separate parts, which must be assembled by the customer.

[NG] For GV series, NA3, NA4, WA3, and WA4 are not applicable.

SVKB-100-1000-25-
T100-IM-25-HC-NA1-H800-PN

WA□

■Conveyor stand H type
belt width ≧ 150mm
(adjustable bolt type, stand base + reinforcement material)

SVKB-100-1000-25
-T100-IM-25-HC-WA2-H800-P500

Overview and Specifications

■Transportation capacity

*Reference value

[ ! ] For accumulation conveying (applicable only to sliding belts),
please consider a conveying capacity of 1/2 or less of that shown in the graph.

[ ! ] The conveying capacity may vary depending on the conditions of use.
[ ! ] This graph shows the conveying capacity under horizontal conditions.

■Unit weight (motor output 6W)

*Reference value

(kg)

Belt width B(mm)	Pulley length L(mm)
Belt width B(mm)	500	1000	1500	2000	2500	3000
50	3.7	4.8	5.8	6.9	7.9	9
100	4.4	5.8	7.3	8.7	10.4	11.8
150	5	6.8	8.7	10.5	12.8	14.6
200	5.7	7.9	10.1	12.3	15.1	17.3
250	6.3	8.9	11.6	14.3	17.3	20
300	6.8	10.5	11.9	16	19	22.1
400	8.2	12.4	15	19.7	23.9	27.7

*If the motor output is 25W, add 1.1kg.
■ Gear head reduction ratio
* The conveying speed is a reference value at IM (motor speed 1500 rpm (50 Hz) / 1800 rpm (60 Hz)).
* It may decrease depending on the load condition.

*Reference value

Gearhead Reduction Ratio	Belt speed (m/min)
Gearhead Reduction Ratio	50Hz	60Hz
5	56.4	67.7
7.5	37.6	45.1
9	31.3	37.6
12.5	22.6	27.1
15	18.8	22.6
18	15.7	18.8
25	11.3	13.5
30	9.4	11.3
36	7.8	9.4
50	5.6	6.8
60	4.7	5.6
75	3.8	4.5
90	3.1	3.8
100	2.8	3.4
120	2.4	2.8
150	1.9	2.3
180	1.6	1.9

[ ! ] For the IM motor type, the conveying speed is constant at the table above.
[ ! ] For the SCM motor type, the maximum speed is as shown in the table above.
[ ! ] For the SCM motor type, the maximum speed can be adjusted up to (1/15) x (maximum speed).