Parallel Keys - With Tapped Hole
Brand :
MISUMI
Caution
Product Description
[Features]·A parallel key (tapped hole type). [Material]·S45C and SUS316.
Parallel keys with tapped hole
These parallel keys have a tapped hole for jacking out the key. Choose the end shape and material (S45C or SUS316), then B and L.
Material and surface treatment
KEDSM (stainless steel); both ends round: KESM, KESSM (stainless steel); one end round: KEGM, KEGSM (stainless steel)
| Type | Material | Surface treatment | Tensile strength | ||
|---|---|---|---|---|---|
| KEDM | KESM | KEGM | S45C | - | 600 N/mm² or more |
| KEDSM | KESSM | KEGSM | SUS316 | ||
| L | Tolerance |
|---|---|
| 10 | 0 - 0.18 |
| 11–15 | 0 - 0.18 |
| 16–30 | 0 - 0.21 |
| 31–50 | 0 - 0.25 |
| 51–80 | 0 - 0.30 |
| 81–110 | 0 - 0.35 |
- For B and H tolerances, see the specification table below.
Part numbers and dimensions
Ordering example
| Type | - | L |
|---|---|---|
| KEDW12 | - | 80 |
| KEDM5 | - | 30 |
| Type | L 5 mm increments | H tolerance | M (coarse) | C | |||
|---|---|---|---|---|---|---|---|
| Type | Bh9 | ||||||
| KEDM KEDSM (stainless steel) KESM KESSM (stainless steel) KEGM KEGSM (stainless steel) | 5 | 0 - 0.030 | 10–50 | 5 | 0 - 0.030 | M3 | 0.25–0.40 |
| 6 | 10–60 | 6 | |||||
| 7 | 0 - 0.036 | 15–60 | 7 | 0 - 0.036 | |||
| 8 | 15–80 | 0 - 0.090 | |||||
| 10 | 15–80 | 8 | M4 | 0.40–0.60 | |||
| 12 | 0 - 0.043 | 20–80 | M5 | ||||
| 14 | 30–90 | 9 | |||||
| 15 | 30–90 | 10 | |||||
| 16 | 40–100 | ||||||
| 18 | 40–110 | 11 | 0 - 0.110 | M6 | |||
Alterations
Alterations are available. Refer to the alteration table for applicable codes, dimensional limits and conditions.
For details, please see the PDF catalog.