Flat Belt Conveyor High Power Type - With Meandering Prevention Crosspiece, Center Drive, 3-Groove Frame (Pulley Dia. 30mm)
Caution
- Items with L Length longer than 2,000mm will be treated as special delivery from 01/11/02019,
and additional cost RM2,772.70 will be added in each product for the delivery fee. For items L Length shorter than 2,000mm will not have any price increase
Product Description
Panasonic and Oriental Motor cannot be selected as of now for motor selection due to unstable supply.
Outer Dimensions
60W/90W Motor Specifications
[ ! ]For A*, please refer to the "*Detail of Dimension A (Motor Overall Length)" table below.
Section X(For M5)
| Frame | Motor Cover | Pulley Holder | |
| [ M ]Material | Aluminum Alloy | Steel | SS400 |
| [ S ]Surface Treatment | Anodized | Painted | Painted |
■Machine Weight (For 60W Motor Output)
＊Reference value (Variations occur depending on motor manufacturer)
(kg)
| Belt Width B(mm) | Length Between Pulleys L(mm) | |||||
| 1000 | 2000 | 3000 | 4000 | 5000 | 6000 | |
| 100 | 20 | 26.3 | 32.6 | 38.8 | 45.2 | 51.6 |
| 200 | 24.5 | 31.7 | 39 | 46.2 | 53.4 | 61.2 |
| 300 | 28.7 | 36.9 | 45.2 | 53.4 | 61.8 | 70.6 |
| 400 | 34 | 43.3 | 52.6 | 61.8 | 71.2 | 81.2 |
| 500 | 41.2 | 51.4 | 61.7 | 72 | 82.2 | 93.5 |
| Output(W) | Motor | Gear Ratio | A | |
| Specs | Maker | |||
| 60W | Induction Motor | Oriental Motor | 5〜180 | 185.0 |
| Made in Taiwan | 5〜75 | 182.6 | ||
| 90〜180 | 191.6 | |||
| Speed Control Motor | Oriental Motor | 5〜180 | 215.0 | |
| Made in Taiwan | 5〜75 | 194.6 | ||
| 90〜180 | 203.6 | |||
| 90W | Induction Motor | Oriental Motor | 5〜180 | 200.0 |
| Made in Taiwan | 5〜75 | 197.6 | ||
| 90〜180 | 206.6 | |||
| Speed Control Motor | Oriental Motor | 5〜180 | 230.0 | |
| Made in Taiwan | 5〜75 | 209.6 | ||
| 90〜180 | 218.6 | |||
※1 If L≧4005, a belt support roller is attached at the position shown in this figure.
Although arranged as shown at shipment, the drive unit and belt support roller positions can be moved.
※2 If L≦525, there are no counterbore holes for nut insertion.
However, 4 nuts are pre-inserted per groove.
[ ! ]JIS standard hex nuts can be used.
[ ! ]Dimensions in the diagram are for Belt Specification H (thickness 0.8mm). Please note that belt thickness varies by belt specification.
[ ! ]Concentrated load on one point may cause distortion in the aluminum frame.[ ! ]Conveyance failure may occur depending on the operating environment.
■Conveyance Capacity ＊Reference value
[ ! ]For accumulation conveyance (applicable only to sliding belts),
please consider a conveyance capacity of 1/2 or less of the graph.
[ ! ]This graph shows conveyance capacity under horizontal conditions.
■Gearhead Reduction Ratio
※Conveyance speed is a reference value at IM (motor rotation speed 1500rpm(50Hz)/1800rpm(60Hz)).
＊May decrease depending on load conditions. ＊Reference value
| Gearhead Reduction Ratio | Belt Speed (m/min) | |
| 50Hz | 60Hz | |
| 5 | 47.1 | 56.5 |
| 7.5 | 31.4 | 37.7 |
| 9 | 26.2 | 31.4 |
| 12.5 | 18.8 | 22.6 |
| 15 | 15.7 | 18.8 |
| 18 | 13.1 | 15.7 |
| 25 | 9.4 | 11.3 |
| 30 | 7.9 | 9.4 |
| 36 | 6.5 | 7.9 |
| 50 | 4.7 | 5.7 |
| 60 | 3.9 | 4.7 |
| 75 | 3.1 | 3.8 |
| 90 | 2.6 | 3.1 |
| 100 | 2.4 | 2.8 |
| 120 | 2.0 | 2.4 |
| 150 | 1.6 | 1.9 |
| 180 | 1.3 | 1.6 |
[ ! ]For motor specification SCM, please refer to the values in the table above for maximum speed.
[ ! ]For motor specification SCM, speed can be adjusted down to (1/15) × (maximum speed).
Conveyable weight decreases as speed decreases.
| Insertion Position | If L≦525, no counterbore holes are provided. 4 nuts/groove are inserted. If L≧530, standard counterbore holes are provided, so nuts are neither inserted nor included. JIS standard hex nuts can be used (sold separately) | Post-insertion Nut (Sold Separately) Can be inserted without processing or disassembly | ||||||
| Name | Model No. | Thread Size | Pitch | Name | Model No. | Thread Size | Pitch | |
| Section X | JIS Class 1 Hex Nut | LBNR5 | M5 (Coarse) | 0.8 | Post-insertion Nut for Conveyor (Pack of 10) | PACK-CHNT5-4 | M4 (Coarse) | 0.7 |
| PACK-CHNT5-3 | M3 (Coarse) | 0.5 | ||||||
Oriental Motor Speed Controller Outer Dimensions
Common for 60W/90W
Back of Control Unit
White
Black
Single-phase 100V Plug (Included)
(Lead wire for Single-phase 200V)
Capacitor
Ground (Earth lead wire: Green)
＊Motor shaft rotates clockwise with connection shown.
Swapping to the dotted line position causes counter-clockwise rotation.
Please purchase extension intermediate cables separately.
[ ! ]Capacitors are not sold individually at Misumi.
[ ! ]Motor cables cannot be extended.
[ ! ]Mounting brackets for speed controllers are not included with speed control motors. When purchasing a speed controller bracket, please select Additional Processing [SCB].
[ ! ]If purchasing a speed controller bracket individually, please enter Model Number [P1-JTEA-17152952] directly on the "Quote/Order" screen.
[ ! ]There are no input terminals to control the speed controller externally.