Compact Strut Clamps - Unequal Dia., Perpendicular Configuration

Brand :

MISUMI

Caution

Product Description

Compact, reducing, and straight strut clamp with shape-processed edges.

Unequal-diameter perpendicular strut connection

This compact reducing strut clamp connects unequal-diameter struts in a perpendicular configuration and has shape-processed edges. Select the type by the two required diameters, then confirm D, D1, B, E, G, H, K, Ra, Rb, r, S, d, and coarse thread M for the intended fit.

The compact form helps accommodate a perpendicular reducing connection where installation dimensions are constrained.
The available material and surface-treatment combinations allow the clamp type to be matched to the installation requirements.

Types and components

D	A	F
8	39	12
10	43	14
12	47	16
15	51	18
20	66	23
25	74	28
30	87	32
35	100	39

Unspecified tolerances conform to JIS B 0405 class m, except dimension B and the 2 mm slit width tolerance.

Type	Material	Surface treatment	Accessories
KLSTNR	General structural steel	Black oxide	Hex socket head cap screw
MLSTNR	General structural steel	Electroless nickel plating	Hex socket head bolt (stainless steel)
ALKLNR	Aluminum alloy	Black anodized	Hex socket head cap screw
HLKLNR	Aluminum alloy	Clear anodized	Hex socket head bolt (stainless steel)
SLKLNR	SUS304	-	Hex socket head bolt (stainless steel)

Supplied bolts

D	Supplied bolts
D	Same diameter, perpendicular	Different diameters, perpendicular
8	M5-12, 2 pcs.	M5-12, 4 pcs.
10	M5-15, 2 pcs.	M5-15, 4 pcs.
12	M5-15, 2 pcs.	M5-15, 4 pcs.
15	M6-20, 2 pcs.	M6-20, 4 pcs.
20	M6-25, 2 pcs.	M6-25, 4 pcs.
25	M6-30, 2 pcs.	M6-30, 4 pcs.
30	M8-35, 2 pcs.	M8-35, 4 pcs.
35	-	M8-40, 4 pcs.

Part numbers and dimensions

Ordering example

Type
KLSTNR20

Type			D1H7		B	E	G	H	K	Ra	Rb	r	S	d	M (coarse)
Type	DH7		D1H7		B	E	G	H	K	Ra	Rb	r	S	d	M (coarse)
Different diameters, perpendicular KLSTNR MLSTNR ALKLNR HLKLNR SLKLNR	8	+ 0.015 0	6	+ 0.012 0	12	14	13	8	7	7.6	5	3	-	5.5	M5
	10	+ 0.015 0	8	+ 0.015 0	16	15	14	9	8	9.8	7	4
	12	+ 0.018 0	10		16	16	15	10	9	10.4	7	-
	15	+ 0.018 0	10		22	18	15	12	9	13.8	10	5		6.6	M6
	20	+ 0.021 0	15	+ 0.018 0	28	23	20	15	12	17.7	13	7.5	11
	25		15	+ 0.018 0	32	26	20	18	12	20.9	15	7.5	14
	30		20	+ 0.021 0	40	30	25	21	16	25.6	19	10	16	9	M8
	35	+ 0.025 0	25	+ 0.021 0	45	33	28	24	19	29.1	21.5	12.5	18	9	M8
D = 35 applies to MLSTNR and SLKLNR only. D H7 and D1 H7 tolerances and perpendicularity are before slitting. g6 or f8 is recommended for the fitted shaft. A long wrench is recommended for tightening.