Mini Rods - O.D. Tolerance Selectable
Brand :
MISUMI
Caution
Product Description
The tolerances and outer diameters are selectable.
Mini Rods, O.D. Tolerance Selectable
Mini rods with selectable O.D. tolerance, in outer-diameter-selectable and outer-diameter-configurable types. Choose the type, then the D tolerance code, D or No., and L.
- The selectable type uses D choices with L specified in 0.1mm increments.
- The configurable type permits D specification in 0.01mm increments.
- Tolerance codes include M, P, G, H, and S, subject to the selected type and material.
These choices determine the applicable dimensional range and model designation, so the tolerance code must be selected together with the diameter and length.
Dimensional drawing
| D | Selectable tolerance | ■ C dimension | ■ L tolerance | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| M | P | G | H | S | or more | Up to | C | or more | Up to | Tolerance | |
| m6 | p6 | g6 | h7 | - | D0.3 | D0.59 | Deburring | 5.0 | 6.0 | ±0.1 | |
| 0.30 – 3.00 | +0.008 +0.002 | +0.012 +0.006 | -0.002 -0.008 | 0 -0.010 | 0 -0.01 | D0.6 | D5 | 0.1 | 6.1 | 30.0 | ±0.2 |
| 30.1 | 120.0 | ±0.3 | |||||||||
| 3.01 – 5.00 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 | 0 -0.012 | 120.1 | 150.0 | ±0.5 | ||||
| O.D. selected type | O.D. specified type | Material | Hardness |
|---|---|---|---|
| KRSH | KRBSH | SKH51 | 58HRC– |
| KRSK | KRBSK | SUJ2 | |
| KRSD | KRBSD | SKD11 | 60HRC– |
| KRSS | KRBSS | SUS440C | 56HRC– |
| KRSG | KRBSG | SUS304 | - |
Part numbers and dimensions
O.D. selected type
| Type | - | D tolerance | - | D | - | L |
|---|---|---|---|---|---|---|
| KRSH | - | M | - | 0.5 | - | 50.0 |
Ordering example
| Type | - | L | - | D | ||
|---|---|---|---|---|---|---|
| Type | D tolerance | NO. | ||||
| KRBSH | H | 0.6 | ― | 30.0 | ― | D0.55 |
O.D. selected type
| Type | L 0.1 mm increments | ||
|---|---|---|---|
| Type | Selectable tolerance | D | |
| KRSH (D0.3–5) KRSK (D0.5–5) KRSD (D1–5) KRSS (D0.3–5) KRSG (D1–5) | M G H | 0.3 | 5.0–50.0 |
| 0.4 | |||
| 0.5 | |||
| 0.6 | |||
| 0.7 | |||
| 0.8 | |||
| 0.9 | |||
| 1 | |||
| 1.1 | |||
| 1.2 | 5.0–60.0 | ||
| 1.3 | |||
| 1.4 | 5.0–70.0 | ||
| 1.5 | 5.0–75.0 | ||
| 1.6 | 5.0–80.0 | ||
| 1.7 | |||
| 1.8 | 5.0–90.0 | ||
| 1.9 | |||
| 2 | 5.0–100.0 | ||
| 2.5 | |||
| 3 | 5.0–150.0 | ||
| 3.5 | |||
| 4 | |||
| 4.5 | |||
| 5 | |||
O.D. specified type (0.01 mm increments)
| Type | L 0.1 mm increments | D 0.01 mm increments | ||
|---|---|---|---|---|
| Type | Selectable tolerance | No. | ||
| KRBSH (No.0.5–5) KRBSK (No.0.6–5) KRBSD (No.1.5–5) KRBSS (No.0.5–5) KRBSG (No.1.5–5) | M P G H S | 0.5 | 5.0–50.0 | 0.30–0.49 |
| 0.6 | 0.50–0.59 | |||
| 1 | 5.0–100.0 | 0.60–0.99 | ||
| 1.5 | 1.00–1.49 | |||
| 2 | 1.50–1.99 | |||
| 2.5 | 2.00–2.49 | |||
| 3 | 2.50–2.99 | |||
| 3.5 | 3.00–3.49 | |||
| 4 | 3.50–3.99 | |||
| 4.5 | 4.00–4.49 | |||
| 5 | 4.50–4.99 | |||
Alterations
Alterations are available. Refer to the alteration table for applicable codes, dimensional limits and conditions.
For details, please see the PDF catalog.