Cam Follower - Hex Socket on Head and Thread, Flat

Brand :

MISUMI

Caution

[Specification Change] The materials, appearances, and packaging specifications of some products will be changed sequentially starting in December 2025. Please see here for details and applicable part numbers. Products before and after the change may be mixed in the same shipment, but there are no problems with use.
Please check the content on our website as the PDF does not contain the most up-to-date information.

Product Description

Hex socket and grease fitting are mounted on both the head and thread part. You can secure or lubricate it from either head or thread side.

Drawing

(*)

Cam Follower - Hex Socket on Head and Thread, Flat: Related Image

D	Tolerance
30	0 －0.009
32 to 47	0 －0.011
52 to 80	0 －0.013
80 to 90	0 －0.015

■With Seal

Cam Follower - Hex Socket on Head and Thread, Flat: Related Image

■No Seal

Cam Follower - Hex Socket on Head and Thread, Flat: Related Image

Type			[M] Material	[A] Accessory
Application	With Seal	No Seal	[M] Material	[A] Accessory
General	CFFH	CFAH	SUJ2^*1	Hex Nut 1 pc. (S45C^*2, Black Oxide)
General	CFFSH	CFASH	SUS440C Equivalent	Hex Nut 1 pc. (SUS304)
Low Dust Generation	CFFCH	—	SUS440C Equivalent	Hex Nut 1 pc. (SUS304)
Heavy Load	CFFGH	—	SUJ2^*1	Hex Nut 1 pc. (S45C^*2, Black Oxide)

^*1 uses equivalent materials in some parts, and ^*2 uses General Structural Steel in some parts. Please see here for details and applicable part numbers.
·Use THK Grease Gun Unit MG70 Attachment Type P when replenishing grease from the grease nipple.
·Operating Temperature Range: −15°C to 80°C (If the temperature exceeds 80°C, plastic and rubber parts may be deformed or damaged)