Flat Belts-For Inclined Transfer/With Meandering Prevention Crosspiece

Brand :

MISUMI

Caution

Product Description

Flat Belts-For Inclined Transfer/With Meandering Prevention Crosspiece
This conveyor belt is ideal for use in both inclined transfer and mini belt conveyor systems, with a wide range of sizes available to choose from.
[Feature]
● Belt Width Minimum / Maximum (mm.) : 50 mm. and 500 mm.
● Thickness (mm.): 0.6 and 1.3
● Belt Length (m.) : The size is configurable between 0.5 to 20 m, and the minimum length can be increased by increments 0.01 m.
● Suitable for Minimum Pulley Belt Diameter Size (mm.) : 20, 30 and 40
● Surface Cover Material: Polyester Canvas
● Color: White and Green
[Application]
It is used in conjunction with pulleys to transfer materials in a conveyor system.

Flat Belts for Inclined Transport with Meandering Prevention Crosspiece

Flat conveyor belts designed for inclined material transfer, equipped with a bottom crosspiece that prevents belt meandering under lateral loads. Matched to specific conveyor geometries and angle requirements by surface pattern and type.

Selection of surface patterns allows precise matching to required incline angles up to 30°.
Supplied endless-processed for installation on conveyor rollers and mini-belt systems.

Dimensional drawing

Flat Belts for Inclined Transport with Meandering Prevention Crosspiece

Shipped as an endless belt.

Belt circumference is the length of the belt underside (inner circumference).

Type	Type No.	Inclination Angle Guide	Color	Ply Quantity	Surface shape	Material		Friction coefficient (reference value vs. polished steel)		Thickness mm	Unit mass kg/m²	Allowable tension N/mm	Min. pulley dia. φmm	Continuous use Temperature °C
Type	Type No.	Inclination Angle Guide	Color	Ply Quantity	Surface shape	Surface	Back	Front	Back	Thickness mm	Unit mass kg/m²	Allowable tension N/mm	Min. pulley dia. φmm	Continuous use Temperature °C
LHBLTDSG	①	15° or less	Green	1	Longitudinal grooves	Polyurethane	Polyester	1.3	0.2	1.4	1	4	25	-30–80
LHBLTDSW	②	15° or less	White	1	Longitudinal grooves	Polyurethane	Polyester	1.3	0.2	1.4	1	4	25	-30–80
LHBLWDSN	③	15° or less	White	2	Longitudinal grooves	Thermoplastic polyurethane	Polyester canvas	1.6	0.2	2.3	2.2	8	50(25)*1	-30–80
LHBLYADSN	④	15° or less	Gray	2	Shallow groove	PVC	Polyester canvas	1.2	0.2	3.3	3.4	8	80	-10–70
LHBLGDSN	⑤	15° or less	Green	2	Basket weave	PVC	Polyester canvas	1.1	0.2	2.3	2.4	8	100(70)*1	-10–60
LHBLGADSN	⑥	20° or less	Green	2	Deep groove	PVC	Polyester canvas	1.2	0.2	5.3	4.2	8	80	-10–70
LHBLGTDSN	⑦	20° or less	Green	2	Rough top	PVC	Polyester canvas	1.1	0.2	5.5	6.5	12	80	-10–70
LHBLYTDSN	⑧	20° or less	Gray	2	Rough top	PVC	Polyester canvas	1.1	0.2	5.5	6.5	12	80	-10–70
LHBLGYDSN	⑨	30° or less	Green	2	Herringbone	Special thermoplastic elastomer	Polyester canvas	2	0.2	3.4	3	8	50	-10–60
LHBLYFDSN	⑩	30° or less	Gray	2	Herringbone	Special thermoplastic elastomer	Polyester canvas	2	0.2	3.4	3	8	75(50)*1	-10–60

*1: Values in ( ) are for an allowable tension of 5 N/mm.

Ply number is the number of fabric layers in the belt. More layers give a higher allowable tension but a larger minimum pulley diameter.

Flat belt tolerances

Width	Tolerance	Thickness	Tolerance	Joint tolerance	Length	Tolerance
Width tolerance		Thickness tolerance			Length tolerance
–400	±2	–1.0	±0.1	±0.3	–2000	±10
401–500	±3	1.1–1.5	±0.2		2001–7000	±20
		1.6–2.0	±0.2		7001–10000	±0.3%
		2.1–5.5	±0.4		10001–	±0.3%

Permanent belt elongation is max. 1% of the total length (reference).

Part numbers and dimensions

Ordering example

Type	W	-	L (m)
LHBLTDSG	350	-	4.23

Type		Circumference L (m)
Type	Belt width W	Specified 0.01 m increments
Type	Specified 10 mm increments	Specified 0.01 m increments
LHBLTDSG LHBLTDSW LHBLWDSN LHBLYADSN LHBLGDSN LHBLGADSN LHBLGTDSN LHBLYTDSN LHBLGYDSN LHBLYFDSN	50–90	0.50–20.00 (L≥W×4)
	100–190
	200–290
	300–400
	410–500

Belts with meandering prevention crosspieces cannot be used with knife edges.

Technical information

Below the minimum pulley diameter, the belt may slip on the pulley.

Belt life is hard to calculate; replace the belt when damage or surface wear is seen.

Run the belt in the direction of the arrow printed on the body.

Overview and technical notes

Type	Inclination guide	Food hygiene	Antibacterial, antifungal	Prevents fraying	Water and humid heat resistance	Prevents heat shrinkage	Surface cleanability	Prevents rub-in shrinkage	Sodium hypochlorite resistance	Non-stick	Oil resistance
LHBLTDSG	15° or less	○	-	○	-	-	-	-	-	-	○
LHBLTDSW	15° or less	○	-	○	-	-	-	-	-	-	○
LHBLWDSN	15° or less	○	-	○	-	-	-	-	-	-	○
LHBLYADSN	15° or less	-	-	○	-	-	-	-	-	-	-
LHBLGDSN	15° or less	-	-	-	-	-	-	-	-	-	-
LHBLGADSN	20° or less	-	-	○	-	-	-	-	-	-	-
LHBLGTDSN	20° or less	-	-	-	-	-	-	-	-	-	-
LHBLYTDSN	20° or less	-	-	-	-	-	-	-	-	-	-
LHBLGYDSN	30° or less	-	-	-	-	-	-	-	-	-	-
LHBLYFDSN	30° or less	-	-	○	-	-	-	-	-	-	-

*2: Not suitable for unwrapped conveying of oily or fatty foods.

◎: excellent, ◯: suitable, △: may be attacked, -: not suitable