Timing Pulleys - T2.5
Brand :
MISUMI
Caution
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Product Description
Small Pitch Timing Pulleys for compact machines
・Materials
*1. The above material and accessory might be changed to the ones equivalent to the originals. Flange is installed, and set screws are included with Shaft Bores P, N and C.
Due to vibrations during transportation, the set screw may become detached from the main body.
| Type | Belt Width | Material *1 | Surface Treatment | Accessory *1 Set Screw | |
| 7mm | Pulley | Flange | |||
| T2.5 | |||||
| TTPA | ● | Aluminum Alloy | Aluminum Alloy | Clear Anodize | SUS304 |
Due to vibrations during transportation, the set screw may become detached from the main body.
Specifications
| Part Number | - | Pulley Shape | - | Shaft Bore Specs., I.D. | - | Z | - | J | |
| (Shaft Bore Specs.: H, P, N, C) | TTPA18T25070 | - | K | - | P4 | ||||
| (Shaft Bore Specs.: V, F) | TTPA60T25070 | - | B | - | V15 | - | Z20 | - | J8 |
| Part Number | Pulley Shape | Pulley Shape | |||||||
| Type | Number of Teeth | Type Nominal Width | Shaft Bore Specifications (~): Specify in 1mm Increment, (, ): Select the former or latter | ||||||
| H Round Hole | P Round Hole + Tap | N, C Keyway + Tap | V, F Stepped Hole | ||||||
| V, F | Z Z-d≥2 | J (0.1mm Increment) | |||||||
| Aluminum TTPA | 14 | T25070 | K | 4 | 4 | - | - | - | - |
| 15 | 4 | 4 | |||||||
| 16 | 4, 5 | 4, 5 | |||||||
| 18 | 4, 5 | 4, 5 | |||||||
| 20 | 5, 6, 6.35 | 5, 6, 6.35 | |||||||
| 22 | B | 5, 6, 6.35 | 5, 6, 6.35 | - | 5, 6 | 7, 8 | 2.0≤J≤L-2.0 | ||
| 24 | 5, 6, 6.35 | 5, 6, 6.35 | 5, 6 | 7, 8 | |||||
| 25 | 5, 6, 6.35 | 5, 6, 6.35 | 5, 6 | 7, 8 | |||||
| 26 | 5, 6, 6.35 | 5, 6, 6.35 | 5, 6 | 7, 8 | |||||
| 28 | 5, 6, 6.35 | 5, 6, 6.35 | 5, 6 | 7, 8 | |||||
| 30 | 5, 6, 6.35 | 5, 6, 6.35 | 5~8 | 7~10 | |||||
| 32 | 5, 6, 6.35, 7, 8 | 5, 6, 6.35, 7, 8 | 8 | 5~10 | 7~12 | 2.0≤J≤L-2.0 | |||
| 34 | 5, 6, 6.35, 7, 8 | 5, 6, 6.35, 7, 8 | 8 | 5~10 | 7~12 | ||||
| 36 | 5, 6, 6.35, 7, 8 | 5, 6, 6.35, 7, 8 | 8 | 5~13 | 7~15 | ||||
| 40 | 5, 6, 6.35, 7, 8 | 5, 6, 6.35, 7, 8 | 8 | 5~14 | 7~16 | ||||
| 44 | 6, 6.35, 7~10 | 6, 6.35, 7~10 | 8, 10, NK10 | 6~14 | 8~16 | 2.0≤J≤L-2.0 | |||
| 48 | 6, 6.35, 7~12 | 6, 6.35, 7~12 | 8, 10, NK10, 11, 12 | 6~14 | 8~16 | ||||
| 50 | 6, 6.35, 7~12 | 6, 6.35, 7~12 | 8, 10, NK10, 11, 12 | 6~22 | 8~24 | ||||
| 60 | 6, 6.35, 7~14 | 6, 6.35, 7~14 | 8, 10, NK10, 11~14 | 6~24 | 8~26 | ||||
| Shaft Bore Dia. 8, 11, 13, 14 are not available for Shaft Bore Spec. C. | |||||||||
Alterations
| Part Number | - | Pulley Shape | - | Shaft Bore Specs., I.D. | - | Z | - | J | - | (KC90•••etc.) | ||||||||
| TTPA40T25070 | - | B | - | P5 | - | FC33 | ||||||||||||
| Alterations | Set Screw Angle | Flange Not Swaged | Flange Swaged on One Side | Flange Cut |
| Code | KC90 | NFC | RFC, LFC | FC |
| Spec. | Changes an angle of set screw to 90. | (Flange 2 pcs. Included) Ordering Code NFC  | (Flange 1 pc. Included) Ordering Code RFC Not applicable to Shape K.  | Cut the flange O.D. in 0.5mm increment. Ordering Code FC17 Application Notes FC≥(O. D.)+1 FC≤F-2 No surface treatment is applied on flange circumference.  |
| Alterations | Side Through Hole / Side Tapped Hole, 3 places | Side Through Hole / Side Tapped Hole, 4 places | Tapped Hole Dimensions | Changes the length of the included set screws. | ||||||||||||
| Code | KTC, QTC | KFC, QFC | TPC | SLH | ||||||||||||
| Spec. | Machine Through Hole / Tapped Hole on the side surface of hub side Ordering Code (Through Hole) KTC20-K5.0 Ordering Code (Tapped Hole) QTC28-M4 Selection (Through Hole) K Selection K4.0~K13.0 (0.5mm Increment) Selection (Tapped Hole) M Selection M3, M4, M5, M6, M8 Application Notes Not applicable to Shape K. Not applicable to Shaft Bore Spec. F. When KTC/QTC is selected for Shaft Bore Specs. P, N and C, KC90 is not available.  | Machine Through Hole / Tapped Hole on the side surface of hub side Ordering Code (Through Hole) KFC20-K5.0 Ordering Code (Tapped Hole) QFC28-M4 Selection (Through Hole) K Selection K4.0~K13.0 (0.5mm Increment) Selection (Tapped Hole) M Selection M3, M4, M5, M6, M8 Application Notes Not applicable to Shape K. Not applicable to Shaft Bore Spec. F. Specify KC90 when selecting KFC/QFC for Shaft Bore Specs. P, N and C. Side holes and tooth side tapped holes might interfere with each other. For details, see the relevant CAD data.  | Ordering Code TPC5 Application Notes Applicable to Shaft Bore Specs. P, N, C only.
| Ordering Code SLH10 Application Notes Applicable to Shaft Bore Specs. P, N, C only.
|