Locating Pins for Fixtures Height Adjusting Pins - Set Screw
Brand :
MISUMI
Caution
- A machining step may remain at the base of the P dimension when selecting the diamond shape.
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Product Description
[Features]Positioning of workpiece in both vertical and horizontal directions is possible. Set screw type.
(Round)
(Diamond)
.gif)
[ ! ] For Diamond Shapes, a step will be produced at the base of the P dimension.
[ ! ] * For T 5.0 to 7.0, detent width is 3 mm. For T 7.1 to 20.0, detent width is 5 mm.
[ ! ] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, chamfer tolerances, threaded length and angle dimension tolerances are excluded.
[ ! ] No grinding relief at P dimension.
| Tip Shape Selectable [ ! ] The center hole remains. | |
| Shape A | Shape B |
Tapered | Taper R |
| [ ! ] P - 2Etan (A/2) ≥ 0.73 | [ ! ] e = P/2 ÷ tan (A/2) + R - (R ÷ sin (A/2)) |
| Reference: sin 15° ≒ 0.259, sin 30° = 0.5, sin 45° ≒ 0.707, sin 60° ≒ 0.866 tan15° ≒ 0.267 tan30° ≒ 0.577 tan45° = 1 tan60° ≒ 1.732 | |
| Type | [M] Material | [H] Hardness | |
| Config. | |||
| HUPTA | Round | SCM435 | Hardened 35 to 40HRC |
| HUPTD | Diamond | ||
| THUPTA | Round | SCM415 | Carburized 55HRC or more (Depth 0.7 to 0.8) |
| THUPTD | Diamond | ||
App. Example
Locating of workpiece in both vertical and horizontal directions is possible.