Bushings for Inspection Components - Shouldered - Standard Type

Brand :

MISUMI

Caution

Product Description

"Height is adjustable at shoulder. Use this product in combination with Straight Slot Pins for Inspection Jigs, etc."

Bushings for Inspection Jigs, Shouldered, Standard Type

Shouldered bushings for inspection jigs. The shoulder allows height adjustment, and the bushing is used together with Straight Slot Pins for Inspection Jigs.

Two configurations: T selectable (T±0.05, H = D + 4) or T and H specified (T±0.01, T in 0.1 mm increments, H in 1 mm increments).
Two P tolerances for each configuration: P +0.03 / +0.01 or P H7.
P is specified in 0.01 mm increments and L in 1 mm increments.

Types and components

P dimension (H7) tolerances

P	H7
2.00–3.00	+0.010 0
3.01–6.00	+0.012 0
6.01–10.00	+0.015 0
10.01–18.00	+0.018 0
18.01–30.00	+0.021 0
30.01–32.00	+0.025 0

See JIS B 0401-2 (1998)

Material	Hardness	Surface treatment	Type
			T selection		T and H specification
			P+0.03 +0.01	P H7	P+0.03 +0.01	P H7
SKS93 equivalent	50–60HRC	-	KJBST	KJBHST	KJBFS	KJBFHS
SKS93 equivalent	50–60HRC	Electroless nickel plating	KJBSTM	KJBHSTM	KJBFSM	KJBFHSM
SUS304	-	-	KJBSTS	KJBHSTS	-	-
SUS440C or 13Cr stainless steel	45–50HRC	-	KJBSTSC	KJBHSTSC	KJBFSSC	KJBFHSSC

Part numbers and dimensions

Ordering example

Type		-	P	-	L	-	T	-	H
Type	D	-	P	-	L	-	T	-	H
KJBST KJBFS	10 10	- -	P3.97 P7.00	- -	L6 L15	- -	T2 T5.0	-	H15

T selection, P tolerance +0.03/+0.01

Type		P +0.03–+0.01	L	T±0.05	H	R
Type	D	0.01 mm increments	1 mm increments	Selection	H	R
(SKS93, hardened) KJBST (SKS93, hardened, electroless nickel) KJBSTM (SUS304) KJBSTS (SUS440C or 13Cr stainless steel) KJBSTSC	8	2.00– 6.00	5–40 When P < 4 L≤P×4 When P ≥ 4 L≤P×3	2 3 5 T≤L-2	D+4	1.0
	10	2.00– 8.00				1.0
	12	4.00–10.00				2.0
	16	8.00–14.00				2.0
	20	10.00–18.00				2.0
	25	15.00–23.00				2.0
	30	20.00–27.00				2.0
	35	25.00–32.00				2.0

When wall thickness is 2 mm or less {(D-P)/2 ≤ 2}, R is 0.5.

SUS304 requires a wall thickness of 2 mm or more {(D-P)/2 ≥ 2}.

D = 30, 35 are available in SKS93 only (not electroless nickel plated).

T selection, P tolerance H7

Type		P H7	L	T±0.05	H	R
Type	D	0.01 mm increments	1 mm increments	Selection	H	R
(SKS93, hardened) KJBHST (SKS93, hardened, electroless nickel) KJBHSTM (SUS304) KJBHSTS (SUS440C or 13Cr stainless steel) KJBHSTSC	8	2.00– 6.00	5–40 When P < 4 L≤P×4 When P ≥ 4 L≤P×3	2 3 5 T≤L-2	D+4	1.0
	10	2.00– 8.00				1.0
	12	4.00–10.00				2.0
	16	8.00–14.00				2.0
	20	10.00–18.00				2.0
	25	15.00–23.00				2.0
	30	20.00–27.00				2.0
	35	25.00–32.00				2.0

T and H specification, P tolerance +0.03/+0.01

Type		P +0.03–+0.01	L	T±0.01	H	R
Type	D	0.01 mm increments	1 mm increments	0.1 mm increments	1 mm increments	R
(SKS93, hardened) KJBFS (SKS93, hardened, electroless nickel) KJBFSM (SUS440C or 13Cr stainless steel) KJBFSSC	8	2.00– 6.00	5–40 When P < 4 L≤P×4 When P ≥ 4 L≤P×3	2.0–5.5 T≤L-2	10–16	1.0
	10	2.00– 8.00			12–18	1.0
	12	4.00–10.00			14–20	2.0
	16	8.00–14.00			18–26	2.0
	20	10.00–18.00			22–37	2.0
	25	15.00–23.00			27–40	2.0

T and H specification, P tolerance H7

Type		P H7	L	T±0.01	H	R
Type	D	0.01 mm increments	1 mm increments	0.1 mm increments	1 mm increments	R
(SKS93, hardened) KJBFHS (SKS93, hardened, electroless nickel) KJBFHSM (SUS440C or 13Cr stainless steel) KJBFHSSC	8	2.00– 6.00	5–40 When P < 4 L≤P×4 When P ≥ 4 L≤P×3	2.0–5.5 T≤L-2	10–16	1.0
	10	2.00– 8.00			12–18	1.0
	12	4.00–10.00			14–20	2.0
	16	8.00–14.00			18–26	2.0
	20	10.00–18.00			22–37	2.0
	25	15.00–23.00			27–40	2.0

Alterations

Alterations are available. Refer to the alteration table for applicable codes, dimensional limits and conditions.

For details, please see the PDF catalog.