Pre-Assembly Insertion Lock Nuts for Aluminum Frames - For 8 Series (Slot Width 10mm)

Brand :

MISUMI

Caution

Please check the content on our website as the PDF does not contain the most up-to-date information.

Product Description

The position of the nut single piece can be fixed with the included set screw. It is convenient for places where panels and covers are frequently removed.

Dimensional Drawing of Nuts


Single Nuts item sales		Sold Nuts in packs
HNTC8(S10C equivalent) SHNTC8(SUS304)		PACK-HNTC8(Pack of 100) PACK-SHNTC8(Pack of 100)

Reference tightening torque (N・m)
M	Equivalent to S10C
8	23.5

[M] Material: S10C equivalent [S] Surface treatment: Trivalent chromate

Specifications/Overvie of Nuts

The Nuts itself can be fixed as it comes with a set screw.
This is useful in locations where panels or covers need to be removed frequently.
There is no stopper.

How to Use of Nuts

This product is a pre-insertion Nuts. Please insert it into the aluminum frame before use.
The Nuts position can be temporarily fixed with a set screw.

Pre-insertion
lock Nuts
HNTC

Secure temporarily with a set screw
.

plate

Aluminum frame

Technical Information of Nuts

Reference tightening torque (N・m)
M	Equivalent to S10C
8	23.5

Nuts for Attaching Various Aluminum Frames and Panels/Brackets (M size - L size)

■8 series (groove width 10mm)

Groove Width	Frame angle	Depth h	Compatible Nuts	Thickness b (mm) of the panel/bracket to be attached to the frame
Groove Width	Frame angle	Depth h	Compatible Nuts	0.8	1	1.2	1.5	2	3	4	4.5	5	6	8.2	9	10	12	14
10	40	12.5	8-4	M4-12					M4-15					M4-20			-	M4-25
			8-5	M5-12					M5-15					M5-20			M5-22	M5-25
			8-6	M6-12					M6-15					M6-20				M6-25
			8-8	-					M8-15					M8-20				M8-25

■ Nuts 8-45 series (groove width 10mm)

Groove Width	Frame angle	Depth h	Compatible Nuts	Thickness b (mm) of the panel/bracket to be attached to the frame
Groove Width	Frame angle	Depth h	Compatible Nuts	0.8	1	1.2	1.5	2	3	4	4.5	5	6	8.2	9	10	12	14
10	45	13	8-4	M4-12					M4-15					M4-20			-	M4-25
			8-5	M5-12					M5-15					M5-20			M5-22	M5-25
			8-6	M6-12					M6-15					M6-20				M6-25
			8-8	-					M8-15					M8-20				M8-25

Selection Support Information of Nuts

■ Nuts Compatible series

This Nuts is compatible withMisumi 8 series (slot width 10 mm)andMisumi 8-45 series (slot width 10 mm) aluminum frames.

8 Series

8-45 Series

8 series (groove width 10 mm) Pre-insertion square Nuts for 40 and 80 square aluminum frames [100 pieces] Related image 2_Compatible series

■ Nuts Difference between first-in and last-in

・MISUMI aluminum frame Nuts are available in a variety of types, including first-in and last-in. Use them according to your needs.

First-in: Install from the groove end face before assembly. They are wide and have little play inside the groove, making bolt tightening easy.

Post-insertion: The Nuts Can be installed through the groove after assembly.

■If the aluminum frame becomes stuck and cannot be removed,
you can remove it by hooking a hex wrench into the hole in the Nuts and turning it at right angles to the groove.

Related Parts of Nuts

Product name		Aluminum frame	bracket	Blind Joint	Frame cap	Groove cover
photograph
8 Series	Product page	Here	Here	Here	Here	Here
8-45 Series	Product page	Here	Here	Here	Here	Here

Example of Use

8 Series/Pre-Assembly Insertion Lock Nuts:Related Image