[Motorized] X-Axis - Linear Ball, CAVE-X POSITIONER, Stock 30 to 75

Brand :

MISUMI

Caution

Please confirm the suitable power supply for each motor option.
5-Phase Stepping Motor with Brake (MA) works with single-phase AC100-120V.
α-Step Motor (PA) works with DC24V.
AC Servo Motor (U) works with single-phase or three-phase AC200-230V.
Please check the content on our website as the PDF does not contain the most up-to-date information.
Delivery times for some of our products may be delayed as national government authorities have imposed limit of capacity at our production sites.

Product Description

It has high stiffness and compact width,: and is compatible with travel length of 30 to 75 mm.

[High Precision] CAVE-X POSITIONER XCVL/XCVLC (Stroke 30~75):Related Image

[ ! ]The above diagrams are for stages incorporating Motor C. For detailed dimensions about stages incorporating Motor F, G, MA, PA or UA, see the relevant CAD data.

[ M ] Material: SUS440C Equivalent
[ S ] Surface Treatment: Electroless Nickel Plating
[ A ] Accessory: SUS Hex Socket Screw M4-14 (8 pcs.)

More Information

■Common Specifications

Feed Screw		Ball Screw Ø8, Lead 1	Ball Screw Ø8, Lead 2
Guide		Linear Ball Guide
Resolution	Full	2µm	4µm
	Half	1µm	2µm
	Fine(At 1/20)	0.1µm	0.2µm
Max. Speed		30mm/sec	35mm/sec
Positioning repeatability		±0.5µm or less
Load Capacity		117.6N
Lost Motion		1µm or less
Backlash		1µm or less
Straightness		3µm or less
Parallelism		15µm or less
Motion Parallelism		10µm or less

[ ! ]

: The values are for standard motors (C).

■Motor/Cable Application Table
The available cable differs depending on the type of motor.

Motor/Cable Application Table	Motor	Cable
	C,F,G	N (Not Provided)
	MA	M
	PA	P
	UA	U

[ ! ]For the cable for C, F or G, see MSCB_ on P.1-2014-3
For the cable for F or G, see

■Max speed

Motor	(mm/sec)
C	30
F	35
G	25
MA	25
PA	40
UA	50

[ ! ]Note that the speed and positioning time will vary depending on the usage conditions.
The values shown here are MISUMI’s reference values. Operation at these values is not guaranteed.

■Electrical Specifications

Motor Option		C	F	G	MA	PA	UA
		Standard	High Torque	High Resolution	With brake	Stepping-out Prevention	High Speed
Motor	Type	5-Phase Stepping Motor 0.75A/Phase (Oriental Motor Co., Ltd.)				α- Step Motor	AC Servo Motor
	Step Angle	0.72°	0.72°	0.36°	0.72°	0.36° (When set to 1000 P/R )	22-bit Encoder (4194304P/R)
Connector	Applicable Receptacle Connector	HR10A-10P-12S (73) (Hirose Electric Co., LTD.)			motor side:5559-06R-210 electromagnetic brake side: 5559-02P-210(MOLEX)	43020-1000 (MOLEX)	Motor Cable JN4FT04SJ1-R (Japan Aviation Electronics Industry, Ltd.)
							Encoder 1674320-1 (Tyco Electronics Japan G.K.)
Sensor	Limit Sensor	Provided
	Home Sensor	Not Provided by standard (Photomicrosensor PM-L25 (Panasonic Industry Co., Ltd.) is available as the option.)
	Near Home Sensor	-
	Power Supply Voltage	DC5~24V ±10%
	Current Consumption	45mA or less (15mA or less per sensor)
	Control Output	NPN Open Collector Output DC30V, 50mA or less Residual Voltage 2V or less (when load current is 50mA) Residual Voltage 1V or less (when load current is 16mA)
	Output Logic	Detecting (Dark): Output Transistor OFF (Non-Conducting)

[ ! ]Sensors with Part Number PM-□24 are to be discontinued and replaced by next-generation products with Part Number PM-□25 from April 2017.

■Recommended Homing Method

Type5	After detection is executed in the CCW direction, the process of detecting in the CW direction is begun based on the CCWLS signal.
Type6	After detection is executed in the CW direction, the process of detecting in the CCW direction is begun based on the CWLS signal.
Type11	After Type 5 is executed, the process of detecting in the CCW direction is begun based on the TIMING signal.
Type12	After Type 6 is executed, the process of detecting in the CW direction is begun based on the TIMING signal.