Specifications

Part Number	-	L	-	S	-	Q
MSSRA812	-	300	-	S10	-	Q5

Part Number			1mm Increment		V / Q	Number of Starts	Plastic Nut Dimension							Allowable Axial Load N (Reference)	Allowable Rotational Speed rpm (Reference)	Tightening Torque N • mm
Type	D	Lead	L	S	V / Q	Number of Starts	D₁	H	A	T	B	P	d	Allowable Axial Load N (Reference)	Allowable Rotational Speed rpm (Reference)	Tightening Torque N • mm
MSSRA	4	01	30~150	2≤S≤Qx3	2.5	1	10	23	11.5	3.5	15	15	2.9	50	2500	180
	4	02	30~150		2.5	2	10	23	11.5	3.5	15	15	2.9	60	2500	180
	6	01	30~250		3 4	1	12	26	14.5	3.5	17	18	3.4	120	2000	400
		02				1	12	26	14.5	3.5	17	18	3.4	60	2000	400
		09				4	12	26	14.5	3.5	17	18	3.4	90	2000	400
		18				4	12	26	14.5	3.5	17	18	3.4	110	2000	400
	8	01	40~250		4 5	1	14	29	18	4	18	21	3.4	200	2000	400
		02	40~250			1	14	29	18	4	18	21	3.4	290	2000	400
		12	40~350	*2≤S≤Qx4		4	14	29	18	4	18	21	3.4	210	2000	400
		24	40~350	*2≤S≤Qx4	4 5 6	6	14	29	18	4	18	21	3.4	210	2000	400
	10	02	50~250	2≤S≤Qx5	5 6 7	1	16	33	22	5	21	24	4.5	460	1500	500
		15	50~500			4	16	33	22	5	21	24	4.5	410	1500	500
		30	50~500			6	16	33	22	5	21	24	4.5	440	1500	500
	12	02	50~250		6 7 8 9	1	18	35	25	5	22	26	4.5	660	1000	500
		18	50~550			6	18	35	25	5	22	26	4.5	750	1000	500
		36	50~550			6	18	35	25	5	22	26	4.5	540	1000	500

[ ! ] There may be a centering hole on machined shaft end. * When Q=4, S will be less than 3x of Q.
[ ! ] The tightening toque applies to the screw for mounting the plastic nut. [ ! ] Note that positioning repeatability changes when nut is exchanged for maintenance.

Type		[ M ]Material
Type		Shaft	Nut
MSSRA	R Screw	SUS304	Special Resin

Miniature Slide Screws-One End Stepped

Caution

Product Description