Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Tapped)

Brand :

MISUMI

Caution

Product Description

Large Head Tapered with each dimension configurable. We reduced the price drastically compared to the conventional products.

● Tapped

(Round)

(Diamond)

Locating Pin - High Hardness Stainless Steel, Large Head, Tapered, Tapped: Related Image

[ ! ] When B + E > 20 mm, the P dim. tolerance is 0-0.02.
[ ! ] P-2EtanA ≥ 0.73 (Tip Diameter ø0.73 or more)
Reference: tan15° ≒ 0.267, tan30° ≒ 0.577
tan45° = 1, tan60° ≒ 1.732
[ ! ] SUS316L has an identification groove at any position on D part.

[ M ] Material	[ H ] Hardness	Pin Config.	Tapped		Features
			D Tol.
			g6	h7
High Hardness Stainless Steel*	35HRC or more	Round	AFPBTA	AFPBTHA	An austenitic stainless steel that offers both hardness (35 HRC and above) and corrosion resistance, providing a cost-effective and well-balanced option.
		Diamond	AFPBTD	AFPBTHD
High Strength Stainless Steel	55HRC or more	Round	ZFPBTA	ZFPBTHA	A martensitic stainless steel with hardness equivalent to SUS440C (55 HRC and above) and superior corrosion resistance compared to SUS440C.
		Diamond	ZFPBTD	ZFPBTHD
SUS316L	－	Round	XFPBTA	XFPBTHA	This is an upgraded material compared to SUS304. This is a low-carbon, more corrosion-resistant, non-magnetic austenitic stainless steel.
		Diamond	XFPBTD	XFPBTHD

*When the dia. exceeds ø10, the center hardness may become 30HRC or more.

■Salt Water Spray Test Results (Austenite)

	High Hardness Stainless Steel (35HRC or more)	SUS316L	SUS304
Before Test
24hr
48hr
168hr

Testing Method
*Conforms to JIS Z2371:2015 Salt Spray Test Method
Appearance of test piece before the test, 24 hrs, 48 hrs, and 168 hrs

■Salt Water Spray Test Results (Martensite)

	High Strength Stainless Steel (55HRC or more)	SUS440C Equivalent	SKS3 Equivalent (Reference)
Before Test
24hr
48hr
168hr	ー	ー	ー

■Shear Testing Results

Material	Shear Load	Hardness
High Strength Stainless Steel	33kN	55HRC or more
High Hardness Stainless Steel	26kN	35HRC or more
SUS304	20kN	10 to 20HRC
SKS3 Equivalent	33kN	60 to 63HRC
SUS440C	31kN	50 to 55HRC

*Locating pins (same size as JPBB6-8) are set on the fixture and
a load applied with a universal tester to measure the shearing load.

・Image Figure

■ Tolerance

D or P	m6	p6	g6	h7
1.00 Up to 3.00	+0.008 +0.002	+0.012 +0.006	－0.002 －0.008	0 －0.010
3.01 Up to 6.00	+0.012 +0.004	+0.020 +0.012	－0.004 －0.012	0 －0.012
6.01 Up to 10.00	+0.015 +0.006	+0.024 +0.015	－0.005 －0.014	0 －0.015
10.01 Up to 18.00	+0.018 +0.007	+0.029 +0.018	－0.006 －0.017	0 －0.018
18.01 Up to 25.50	+0.021 +0.008	+0.035 +0.022	－0.007 －0.020	0 －0.021