Locating Pins - Small Head, Round Tapered - Press Fit
Caution
- The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change - Please check the content on our website as the PDF does not contain the most up-to-date information.
Product Description
- Locating Pins - Small Head, Round Tapered - Press Fit from MISUMI.
- Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
●Press Fit
(Round)
(Diamond)
(1) Round Shape has no relief.
(ⅰ)When D=P and tolerances are different
(ⅱ)When D=P and tolerances are the same
(L+B) is general tolerance.
(2)Diamond Shape has a relief.
When D<3
a＝0.5
d＝D－0.1
[ ! ]Relief dimension is a reference value.
When D≥3
a＝1.0
d＝D－0.2
[ ! ]Tapered Type with the same diameter for which D=P is standardized is also available.
| Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | |
| Round | Diamond | ||||
| (1) | SKS3 Equivalent | - | Treated Hardness: 60~63HRC | KFA | KFD |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50~55HRC Plating Hardness: 750HV~ | GKFA | GKFD |
| (3) | SKS3 Equivalent | - | - | BKFA | BKFD |
| (4) | SUS304 | - | - | SKFA | SKFD |
| (5) | SUS304 | Hard Chrome Plating | Plating Hardness: 750HV~ | HKFA | HKFD |
| (6) | SUS440C or 13Cr stainless | - | Treated Hardness: 50~55HRC | CKFA | CKFD |