Locating Pins - Press Fit
Brand :
MISUMI
Caution
- The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change - Please check the content on our website as the PDF does not contain the most up-to-date information.
Product Description
- Locating Pins - Press Fit from MISUMI.
- Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole sometimes not available for SUS304.
- Provided 3 options of alteration, Insertion guide (GDC), Air vent (AC), or C Chamfered Size Changes (CN).
●Press Fit
When D<3
a＝0.5
d＝D－0.1
[ ! ]Relief dimension is a reference value.
When D≥3
a＝1.0
d＝D－0.2
[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]Polishing and centering hole may not be provided.
[ ! ]Polishing and centering hole may not be provided.
| Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type |
| Press Fit | ||||
| (1) | SKS3 Equivalent | - | Treated Hardness: 60~63HRC | KFFA |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50~55HRC Plating Hardness: 750HV~ | GKFFA |
| (3) | SKS3 Equivalent | - | - | BKFFA |
| (4) | SUS304 | - | - | SKFFA |
| (5) | SUS440C or 13Cr stainless | - | Treated Hardness: 50~55HRC | CKFFA |