Locating Pins - Large Head, Round Tapered - Tapped
Brand :
MISUMI
Caution
Product Description
[ ! ]An insertion guide will only be machined on p6 tolerance components.
[ ! ]SUS440C equivalent has an identification groove on D mounting section.
[ ! ]Polished, centering hole may not be on all SUS304 Pins.
[ ! ]SUS440C equivalent has an identification groove on D mounting section.
[ ! ]Polished, centering hole may not be on all SUS304 Pins.
| Material No. | [ M ] Material | [ S ] Surface Treatment | [ H ] Hardness | Type | D Tolerance and Shape Code |
| ① | SKS3 Equivalent | - | Treated Hardness: 60 ~ 63HRC | JPRB | TB (Tapped) |
| ② | SKS3 Equivalent | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPRB | |
| ③ | SUS304 | - | - | SJPRB | |
| ④ | SUS440C equivalent | - | Treated Hardness: 50 ~ 55HRC | CJPRB | |
| ⑤ | SKS3 Equivalent | Buffed Surface | Treated Hardness: 60 ~ 63HRC | MJPRB |
Specifications
| Part Number | - | P | ||||
| Type | Shape | D | ||||
| MJPRB | TB | 12 | - | 16 | ||
■Tapped
[ ! ]Pins of D dimension with T have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".)
* Note the strength of under-head portion.>>P.1566 [ ! ]Please confirm pilot hole depth on >>P.1566. Holes may go through.
[ ! ]Tightening torque (reference) will be within Strength Class of Tightening Torque on Technical Data >> P. 2297 (10.9). Not applicable when using locking materials or lock washers.
| Part Number | P Selection | L | B | E | M (Coarse) | * Tightening Torque N · cm | ℓ | |||||||||||
| Type | Shape Code | D | D dim. Tolerance g6 | |||||||||||||||
| JPRB GJPRB SJPRB CJPRB (Buff Finished) MJPRB | TB | 6 | -0.016 | 8 | 10 | 10 | 8 | 5 | M3 | 147 | 5 | |||||||
| 6T | -0.016 | 8 | 10 | 10 | 8 | 5 | M2.6 | - | 4 | |||||||||
| 8 | -0.019 | 10 | 12 | 13 | 15 | 8 | 5 | M5 | 676 | 8 | ||||||||
| 8T | -0.019 | 10 | 12 | 13 | 15 | 8 | 5 | M4 | 333 | 6 | ||||||||
| 10 | -0.019 | 12 | 13 | 15 | 15 | 10 | 5 | M5 | 676 | 8 | ||||||||
| 12 | -0.023 | 13 | 15 | 16 | 15 | 10 | 6 | M5 | 676 | 8 | ||||||||
| 13 | -0.023 | 15 | 16 | 22 | 10 | 6 | M8 | 2803 | 12 | |||||||||
| 16 | -0.023 | 20 | 25 | 22 | 10 | 7 | M8 | 2803 | 12 | |||||||||
| 20 | -0.027 | 25 | 30 | 30 | 15 | 7 | M8 | 2803 | 12 | |||||||||
* Note the strength of under-head portion.>>P.1566 [ ! ]Please confirm pilot hole depth on >>P.1566. Holes may go through.
[ ! ]Tightening torque (reference) will be within Strength Class of Tightening Torque on Technical Data >> P. 2297 (10.9). Not applicable when using locking materials or lock washers.
More Information
