Locating Pins - Large Head, Round Tapered, D and P Tolerance, Taper R Selectable - Tapped

Brand :

MISUMI

Caution

Product Description

Locating Pins - Large Head, Round Tapered, D and P Tolerance, Taper R Selectable - Tapped:Related Image

Material No.	[ M ] Material	[ S ] Surface Treatment	[ H ] Hardness	Type
Material No.	[ M ] Material	[ S ] Surface Treatment	[ H ] Hardness	Tapped
①	SKS3 Equivalent	-	Treated Hardness: 60 ~ 63HRC	KFPBT
②	SKS3 Equivalent	Hard Chrome Plating Plating Thickness: 3µm or more	Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~	GKFPBT
③	SUS304	-	-	SKFPBT
④	SUS440C equivalent	-	Treated Hardness: 50 ~ 55HRC	CKFPBT
⑤	SKS3 Equivalent	Buffed Surface	Treated Hardness: 60 ~ 63HRC	MKFPBT
⑥	SKS3 Equivalent	Hard Chrome Plating + Buffed Plating Thickness: 3µm or more	Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~	MGKFPBT
⑦	SUS440C equivalent	Buffed Surface	Treated Hardness: 50 ~ 55HRC	MCKFPBT

Specifications

Part Number

Type

D Tol.

P Tolerance

MGKFPBT

P12.00

L10

B4.0

E6.0

R20

■Tolerance Selection

D or P	Standard Grade
	M	P	G	H	S
	m6	p6	g6	h7	-
3.01 ~ 6.00	+0.012 +0.004	+0.020 +0.012	-0.004 -0.012	0 -0.012	0 -0.01
6.01 ~ 10.00	+0.015 +0.006	+0.024 +0.015	-0.005 -0.014	0 -0.015
10.01 ~ 18.00	+0.018 +0.007	+0.029 +0.018	-0.006 -0.017	0 -0.018
18.01 ~ 30.00	+0.021 +0.008	+0.035 +0.022	-0.007 -0.020	0 -0.021

■Tapped

Part Number				P 0.01mm Increment	L 1mm Increment	B 0.5mm Increment	E 0.5mm Increment	R	M (Coarse)	* Tightening Torque N · cm	ℓ
Type	D Tolerance	P Tolerance	D	P 0.01mm Increment	L 1mm Increment	B 0.5mm Increment	E 0.5mm Increment	R	M (Coarse)	* Tightening Torque N · cm	ℓ
KFPBT GKFPBT SKFPBT CKFPBT MKFPBT MGKFPBT MCKFPBT	M P G H	S M P G H	6	6.00~10.00	6~12	3.0~12.0	1.0~20.0	5 10 15 20 25 30 35 40	M3	147	5
			6T	6.00~10.00	6~10	3.0~12.0			M2.6	-	4
			8	8.00~13.00	8~16	3.0~14.0			M5	676	8
			8T	8.00~13.00	6~12	3.0~14.0			M4	333	6
			10	10.00~15.00	10~20	3.0~16.0			M5	676	8
			10T	10.00~15.00	6~16	3.0~16.0			M4	333	6
			12	12.00~16.00	12~24	3.0~18.0			M5	676	8
			12T	12.00~16.00	8~18	3.0~18.0			M4	333	6
			13	13.00~18.00	13~26	3.0~20.0			M8	2803	10
			13T	13.00~18.00	8~20	3.0~20.0			M6	1156	9
			16	16.00~25.00	16~32	3.0~20.0			M8	2803	12
			16T	16.00~25.00	10~24	3.0~20.0	[ ! ]Configurable range depends on P dimension. Confirm "Details of E Dimension and R Dimension Range" in the table.		M6	1156	9
			20	20.00~30.00	20~40	3.0~20.0			M8	2803	12
			20T	20.00~30.00	12~30	3.0~20.0			M6	1156	9

[ ! ]Pins with T callout on the D dimension will have one size smaller thread compared to the standard D size. (Example: D= 10T it will have a M4, D=10 standard is M5)
* Consult the following page for technical information regarding the maximum torque applicable. >> P.1566 [ ! ]Please confirm pilot hole depth on P.1566. Holes may go through.
[ ! ]Tightening torque will be within Strength Class of 10.9 as indicated in the Technical Data
Not applicable when using locking adhesives or lock washers.

■Details of E and R Dimension Range

P 0.01mm Increment	E 0.5mm Increment	R
6.00~8.00	2.5~4.0		10	15
8.01~12.00	4.5~7.0		10	15	20
12.01~16.00	5.0~10.0			15	20	25
16.01~20.00	5.0~15.0				20	25	30
20.01~25.00	5.0~15.0					25	30	35
25.01~30.00	5.0~20.0						30	35	40