Locating Pins for Height Adjusting - Small Head Press Fit

Brand :
MISUMI
Caution
- The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change - Please check the content on our website as the PDF does not contain the most up-to-date information.
Product Description
Locating pins for printed circuit boards. B dimension is fixed short for thin boards. Reasonably priced.
• Small Head Press Fit
* The insertion guide is applicable to tolerance m6 and p6 type only.
[ ! ]When the P dimension is small, a centering hole will cause the sphere section to become small.
[ ! ]Polishing and centering hole may not be provided.
[ ! ]The spherical head may be polished.

When D(P)≥3
a=1.0
d=D(P)-0.2
[ ! ]Relief dimension is a reference value.
When D(P)<3
a=0.5
d=D(P)-0.1
[ ! ]When the P dimension is small, a centering hole will cause the sphere section to become small.
[ ! ]Polishing and centering hole may not be provided.
[ ! ]The spherical head may be polished.
| Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Small Head |
| Press Fit | ||||
| ① | SUS304 | - | - | SFPMA (m6) SFPMP (p6) |
| ② | SUS440C or 13Cr stainless | - | Treated Hardness: 50 ~ 55HRC | CFPMA (m6) CFPMP (p6) |
Example
