Height Adjusting Pins - Press Fit
Brand :
MISUMI
Caution
- The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change - Please check the content on our website as the PDF does not contain the most up-to-date information.
Product Description
- Height Adjusting Pins - Press Fit from MISUMI.
- Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Hard Chrome Plating products are not available in Precision Grade Tolerance.
●Press Fit
(Round)
(Diamond)
When P<3
a＝0.5
d＝P－0.1
[ ! ]Relief dimension is a reference value.
When P≥3
a＝1.0
d＝P－0.2
[ ! ]When D=P
(1) Round Shape has no relief.
(i) When D=P and tolerances are different
(ii) When D=P and tolerances are the same
(L+B) is general tolerance.
(1) Round Shape has no relief.
(i) When D=P and tolerances are different
(ii) When D=P and tolerances are the same
(L+B) is general tolerance.
(2) Diamond Shape has a relief.
[ ! ]Straight Tapered Type for which D=P is standardized is also available. >>here
[ ! ]Polishing and centering hole sometimes not available for SUS304.
[ ! ]P-2EtanA≥0.73 (Tip dia. Ø0.73 or more)
Reference: tan15°≈0.267 tan30°≈0.577
tan45°=1 tan60°≈1.732
[ ! ]On some combination of dimensions, the centering hole may not be available.
| Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | |
| Round | Diamond | ||||
| (1) | SKS3 Equivalent | - | Treated Hardness: 60~63HRC | KFSA | KFSD |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50~55HRC Plating Hardness: 750HV~ | GKFSA | GKFSD |
| (4) | SUS304 | - | - | SKFSA | SKFSD |
| (5) | SUS304 | Hard Chrome Plating | Plating Hardness: 750HV~ | HKFSA | HKFSD |
| (6) | SUS440C or 13Cr stainless | - | Treated Hardness: 50~55HRC | CKFSA | CKFSD |