Height Adjusting Pins - Counterbored

Brand :

MISUMI

Caution

Product Description

- Height Adjusting Pins – Counterbored from MISUMI.
- Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Hard Chrome Plating products are not available in Precision Grade Tolerance.

Locating Pins - Small Head, Tapered, Taper Angle, D and P Selectable Tolerance - Tapped:Related Image

[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]Polishing and centering hole sometimes not available for SUS304.
[ ! ]P-2EtanA≥0.73 (Tip dia. Ø0.73 or more)
Reference: tan15°≈0.267 tan30°≈0.577
tan45°=1 tan60°≈1.732

Material No.	[ M ]Material	[ S ]Surface Treatment	[ H ]Hardness	Type
Material No.	[ M ]Material	[ S ]Surface Treatment	[ H ]Hardness	Round	Diamond
(1)	SKS3 Equivalent	-	Treated Hardness: 60~63HRC	KFSTA	KFSTD
(2)	SKS3 Equivalent	Hard Chrome Plating	Treated Hardness: 50~55HRC Plating Hardness: 750HV~	GKFSTA	GKFSTD
(4)	SUS304	-	-	SKFSTA	SKFSTD
(5)	SUS304	Hard Chrome Plating	Plating Hardness: 750HV~	HKFSTA	HKFSTD
(6)	SUS440C or 13Cr stainless	-	Treated Hardness: 50~55HRC	CKFSTA	CKFSTD