Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Press Fit)
Brand :
MISUMI
Caution
- The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change - Please check the content on our website as the PDF does not contain the most up-to-date information.
Product Description
Sphere Small Head with each dimension configurable. The tolerances on both ends are also configurable.
●Press Fit
(Round)
(Diamond)
When P<3
a＝0.5
d＝P－0.1
[ ! ]Relief dimension is a reference value.
When P≥3
a＝1.0
d＝P－0.2
[ ! ]When D=P
(1) Round Shape has no relief.
(i) When D=P and tolerances are different
(ii) When D=P and tolerances are the same
(L+B) is general tolerance.
(2) Diamond Shape has a relief.
[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]Polishing and centering hole may not be provided.
[ ! ]When the P dimension is small, a centering hole will cause the sphere section to become small.
| Material No. | [ M ]Material | [ S ] Surface Treatment | [ H ]Hardness | Type | |
| Round | Diamond | ||||
| (1) | SKS3 Equivalent | - | Treated Hardness: 60~63HRC | KFQSA | KFQSD |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50~55HRC Plating Hardness: 750HV~ | GKFQSA | GKFQSD |
| (3) | SUS304 | - | - | SKFQSA | SKFQSD |
| (4) | SUS440C or 13Cr stainless | - | Treated Hardness: 50~55HRC | CKFQSA | CKFQSD |