Locating Pins - Small Head, Round Tapered, D and P Tolerance, Taper R Selectable - Internal Thread

Brand :

MISUMI

Caution

Product Description

Locating Pins - Small Head, Round Tapered, D and P Tolerance, Taper R Selectable - Internal Thread:Related Image

Material No.	[ M ]Material	[ S ]Surface Treatment	[ H ]Hardness	Type
Material No.	[ M ]Material	[ S ]Surface Treatment	[ H ]Hardness	Tapped
①	SKS3 Equivalentvalent	-	Treated Hardness: 60 ~ 63HRC	KFPST
②	SKS3 Equivalent	Hard Chrome Plating Plating Thickness: 3µm or more	Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~	GKFPST
③	SUS304	-	-	SKFPST
④	SUS440C equivalent	-	Treated Hardness: 50 ~ 55HRC	CKFPST
⑤	SKS3 Equivalent	Buffed Surface	Treated Hardness: 60 ~ 63HRC	MKFPST

Specifications

Part Number

Type

D Tol.

P Tolerance

KFPST

P12.00

L16

B4.0

E5.0

R15

■Tolerance Selection

D or P	Standard Grade
	M	P	G	H	S
	m6	p6	g6	h7	-
4.00 ~ 6.00	+0.012 +0.004	+0.020 +0.012	-0.004 -0.012	0 -0.012	0 -0.01
6.01 ~ 10.00	+0.015 +0.006	+0.024 +0.015	-0.005 -0.014	0 -0.015
10.01 ~ 18.00	+0.018 +0.007	+0.029 +0.018	-0.006 -0.017	0 -0.018
18.01 ~ 20.00	+0.021 +0.008	+0.035 +0.022	-0.007 -0.020	0 -0.021

■Tapped

Part Number				P 0.01mm Increment	L 1mm Increment	B 0.5mm Increment	E 0.5mm Increment	R	M (Coarse)	^{* Tightening Torque} N • cm	ℓ
Type	D Tolerance	P Tolerance	D
KFPST GKFPST SKFPST CKFPST (Buff Finished) MKFPST [ ! ]Applicable when P≥5.	M P G H	S M P G H	6	4.00~6.00	8~12	3.0~12.0	1.0~15.0	5 10 15 20 25 30	M3	147	5
			6T						M2.6	-	4
			8	6.00~8.00	11~16	3.0~14.0			M5	676	8
			8T						M4	333	6
			10	7.00~10.00	11~20	3.0~16.0			M5	676	8
			10T		8~16				M4	333	6
			12	7.00~12.00	12~24	3.0~18.0			M5	676	8
			12T		8~18				M4	333	6
			13	8.00~13.00	13~26	3.0~20.0			M8	2803	10
			13T		10~20				M6	1156	9
			16	10.00~16.00	16~32	3.0~20.0			M8	2803	12
			16T		10~24		[ ! ]Configurable range depends on P dimension. Confirm "Details of E Dimension and R Dimension Range" in the table.		M6	1156	9
			20	13.00~20.00	20~40	3.0~20.0			M8	2803	12
			20T		12~30				M6	1156	9

[ ! ]Pins with T callout on the D dimension will have one size smaller thread compared to the standard D size. (Example: D= 10T it will have a M4, D=10 standard is M5)
[ ! ]Consult the following page for technical information regarding the maximum torque applicable. >> P.1566 [ ! ]Please confirm pilot hole depth on >>P. 1566. Holes may go through.
*Tightening torque will be within Strength Class of 10.9 as indicated in the Technical Data >> P. 2297 (10.9). * Not applicable when using locking adhesives or lock washers.

■Details of E and R Dimension Range

P 0.01mm Increment	E 0.5mm Increment	R
2.00~4.00	1.0~2.0	5	10
4.01~8.00	2.5~4.0		10	15
8.01~12.00	4.5~7.0		10	15	20
12.01~16.00	5.0~10.0			15	20	25
16.01~20.00	5.0~15.0				20	25	30