Locating Pins - Straight, Sphere (Press Fit)

Brand :

MISUMI

Caution

The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change
Please check the content on our website as the PDF does not contain the most up-to-date information.

Product Description

- Locating Pins - Straight, Sphere (Press Fit) from MISUMI.
- The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- When the D dimension is small, a centering hole will cause the sphere section to become small.
- On some combination of dimensions, the center hole may not be available.
- Polishing and centering hole is sometimes not available for SUS304.

● Press Fit

[ ! ] For SUS440C or 13Cr stainless steel, an identification groove is provided at any position on D part.
[ ! ] When the D dimension is small, a centering hole will cause the sphere section to become small.
[ ! ] On some combination of dimensions, the center hole may not be available.
[ ! ] SUS304 products may not be polished and have no centering hole.

Material No.	[ M ] Material	[ S ] Surface Treatment	[ H ] Hardness	Type
Material No.	[ M ] Material	[ S ] Surface Treatment	[ H ] Hardness	D Fixed	D Configurable
(1)	SKS3 Equivalent	-	Treated Hardness: 60 to 63 HRC	LPSQA	FLPSQA
(2)	SKS3 Equivalent	Hard Chrome Plating	Treaded Hardness: 50 to 55 HRC Plating Hardness: 750 HV or more	GLPSQA	FGLPSQA
(3)	SKS3 Equivalent	-	-	BLPSQA	FBLPSQA
(4)	SUS304	-	-	SLPSQA	FSLPSQA
(5)	SUS304	Hard Chrome Plating	Plating Hardness: 750 HV or more	HLPSQA	FHLPSQA
(6)	SUS440C or 13Cr Stainless Steel	-	Treaded Hardness: 50 to 55 HRC	CLPSQA	FCLPSQA