Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Press Fit)
Brand :
MISUMI
Caution
Product Description
- Locating Pins - Shouldered-Taper Angle (D, P Tolerance Selectable-Press Fit) from MISUMI.
- Shouldered with each dimension configurable.
- Pin’s mounting method can be selected 3 types, Thread, Tapped or Press fit.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- SUS304 may not be polished and may have no centering hole.
[ ! ]P-2EtanA≥0.73 (Tip dia. Ø0.73 or more)
Reference: tan15°≈0.267 tan30°≈0.577
tan45°≈1 tan60°≈1.732
[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]SUS304 may not be polished and may have no centering hole.
| Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type |
| Press Fit | ||||
| (1) | SKS3 Equivalent | - | Treated Hardness: 60~63HRC | KFHA |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50~55HRC Plating Hardness: 750HV~ | GKFHA |
| (3) | SUS304 | - | - | SKFHA |
| (5) | SUS440C or 13Cr stainless | - | Treated Hardness: 50~55HRC | CKFHA |