Bushings for Inspection Components - Oval - Shouldered (Dowel Pin / D Cut)
Brand :
MISUMI
Caution
Product Description
Bushings for Inspection Components and with the hole machined to Oval Shape. Use this product when the mating two shafts have the different tolerances.
[ ! ]Some combinations are unavailable. Please refer to the table below
[ ! ]1. When wall is 2mm or less {(D-P)/2≤2}, R is 0.5.
| [ M ] Material | [ H ] Hardness | Type | |||
| Dowel Pin | D Cut | ||||
| P+0.03 +0.01 W+0.03 +0.01 | PH7 WH7 | P+0.03 +0.01 W+0.03 +0.01 | PH7 WH7 | ||
| SKS93 Equivalent | 50~60HRC | KJBSTC | KJBHSTC | KJBSTCD | KJBHSTCD |
| SUS304 | - | KJBSTCS | KJBHSTCS | - | - |
| SUS440C or 13Cr stainless | 45~50HRC | KJBSTCC | KJBHSTCC | KJBSTCDC | KJBHSTCDC |