Aluminum Frame 8 Series Rectangular 40 × 80 mm 4 Side Slots - A6N01SS-T5 Aluminum

Brand :

MISUMI

Caution

Additional freight and delivery charge are added to items longer than 2000.1mm

Product Description

Aluminum Frame 8 Series/ Slot width 10/40x80mm.
Aluminium Profile is a device used to build machine structures, available in various sizes,cross section shapes and with different types of surfaces treatment to choose from.
[Feature]
● Shape : Rectangle.
● Slot width : 10 mm. /1 slot
● Cross-section : 40 mm. X 80 mm.
● Overall length :The size is configurable between 50 to 4000 mm, and the minimum length can be increased by increments 0.5 mm.
● Material : Aluminium grade A6N01SS-T5, A6061SS-T6 Equivalent, A6063S-T5 and A6063S-T6 Equivalent
● Surface treatment: Clear/ Black Anodize, Clear Coating
[Application]
Used for automatic machine structures in various industries such as automotive industry, electronics industry, etc.

Dimensional Drawing of Aluminum Frames

HFS (standard type)	EFS (standard type)	HFSL (lightweight type)	GFS (high rigidity type)

* There is no tolerance for the L dimension of the fixed length frame

Aluminum Frames

Aluminum Frames, For other dimensional tolerance-related information,

8 Series Aluminum Frames

Groove details (common to NFS, HFS, CAF, GNFS, and GFS types)

Groove details (EFS)

Groove bottom details

(HFS/CAF
　　type)

(GFS
　type)

(GNFS
　type)

(EFS
　type)

Enlarged view of part A

■Aluminum Frames, The 8 Series is an aluminum frame with a groove width of 10±0.36 mm. Suitable for M8 bolts.
[ ! ]No surface treatment is applied to cut surfaces or additionally machined areas.
[ ! ]If an end tap is specified, it will be machined in the red circle.

Specified Length Aluminum Frames Specifications Table (Additional Processing: Possible)

Model Aluminum Frames	−	L
HFS8-4080	−	800

type	Material	Surface Treatment	Model	L specified in 0.5mm increments (tolerance ±0.5mm)	Mass kg/m	Cross-sectional area mm ²	Moment of inertia mm ⁴
type	Material	Surface Treatment	Model	L specified in 0.5mm increments (tolerance ±0.5mm)	Mass kg/m	Cross-sectional area mm ²	ℓx	ℓy
HFS	A6005CSS-T5	White anodized aluminum	HFS8-4080	5 0 to 4 0 0 0	3	1109	19.8× ¹⁰⁴	71.9× ¹⁰⁴
HFS	A6005CSS-T5	Black anodized aluminum	HFSB8-4080	5 0 to 4 0 0 0	3	1109	19.8× ¹⁰⁴	71.9× ¹⁰⁴
HFS	A6005CSS-T5	Clear coating	C A F 8-4 0 8 0	5 0 to 4 0 0 0	3	1109	19.8× ¹⁰⁴	71.9× ¹⁰⁴
HFS	A6005CSS-T5	Baked finish (yellow) *1	HFSY8-4080	5 0 to 4 0 0 0	3	1109	19.8× ¹⁰⁴	71.9× ¹⁰⁴
HFSL	A6005CSS-T5	White anodized aluminum	H F S L 8 －4 0 8 0	5 0 to 4 0 0 0	2.12	785	13.4× ¹⁰⁴	52.9× ¹⁰⁴
HFSL	A6005CSS-T5	Black anodized aluminum	H F S L B 8 －4 0 8 0	5 0 to 4 0 0 0	2.12	785	13.4× ¹⁰⁴	52.9× ¹⁰⁴
EFS	A6005CSS-T5	White anodized aluminum	EFS8-4080	5 0 to 4 0 0 0	2.79	1034	19.9× ¹⁰⁴	72.6× ¹⁰⁴
EFS	A6005CSS-T5	Black anodized aluminum	E F S B 8 －4 0 8 0	5 0 to 4 0 0 0	2.79	1034	19.9× ¹⁰⁴	72.6× ¹⁰⁴
GFS	A6061SS-T6 equivalent	White anodized aluminum	GFS8-4080	5 0 to 4 0 0 0	3.62	1340	25.21× ¹⁰⁴	90.87× ¹⁰⁴

[ ! ] *1Aluminum Frames, The color of HFSY8 is D22-80V (Japan Paint Manufacturers Association, reference Munsell value 2.5Y8/12).
[ ! ] If you require a length of 6000 mm without anodizing,

Fixed Length Aluminum Frames Specifications Table (Effective Length 4000/1000mm)

[ ! ]Aluminum Frames, Fixed-length frames have a format with K at the beginning of the format code for each frame.

Model Aluminum Frames	−	L
KHFS8−4080	−	1000
KGFS8−4080	−	4000

type	Material	Surface Treatment	Model	Lmm (no tolerance specified) *2	Cross-sectional area mm ²	Moment of inertia mm ⁴
type	Material	Surface Treatment	Model	Lmm (no tolerance specified) *2	Cross-sectional area mm ²	ℓx	ℓy
HFS	A6005CSS-T5	White anodized aluminum	K H F S 8 －4 0 8 0	4 0 0 0	1109	19.8× ¹⁰⁴	71.9× ¹⁰⁴
HFS	A6005CSS-T5	White anodized aluminum	K H F S 8 －4 0 8 0	1 0 0 0	1109	19.8× ¹⁰⁴	71.9× ¹⁰⁴
HFS	A6005CSS-T5	Black anodized aluminum	K H F S B 8 －4 0 8 0	4 0 0 0	1109	19.8× ¹⁰⁴	71.9× ¹⁰⁴
HFS	A6005CSS-T5	Clear coating	K C A F 8 －4 0 8 0	4 0 0 0	1109	19.8× ¹⁰⁴	71.9× ¹⁰⁴
HFS	A6005CSS-T5	Baked finish (yellow) *1	KHFSY8-4080	4 0 0 0	1109	19.8× ¹⁰⁴	71.9× ¹⁰⁴
HFSL	A6005CSS-T5	White anodized aluminum	K H F S L 8 －4 0 8 0	4 0 0 0	785	13.4× ¹⁰⁴	52.9× ¹⁰⁴
HFSL	A6005CSS-T5	Black anodized aluminum	K H F S L B 8 －4 0 8 0	4 0 0 0	785	13.4× ¹⁰⁴	52.9× ¹⁰⁴
EFS	A6005CSS-T5	White anodized aluminum	K E F S 8 －4 0 8 0	4 0 0 0	1034	19.9× ¹⁰⁴	72.6× ¹⁰⁴
EFS	A6005CSS-T5	Black anodized aluminum	K E F S B 8 －4 0 8 0	4 0 0 0	1034	19.9× ¹⁰⁴	72.6× ¹⁰⁴
GFS	A6061SS-T6 equivalent	White anodized aluminum	K G F S 8 －4 0 8 0	4 0 0 0	1340	25.21× ¹⁰⁴	90.87× ¹⁰⁴

[ ! ] *1Aluminum Frames, The color of KHFSY8 is D22-80V (Japan Paint Manufacturers Association, reference Munsell value 2.5Y8/12).
[ ! ] *2Aluminum Frames, The effective length of 4000 mm means that the frame has an effective length of 4000 mm or more that can actuallybe used.
The actual length including the gripping area is 4000 mm or more (it will be several tens of mm longer).
The fixed-length frame is a frame that the customer cuts to their own size, so the exact length cannot bespecified.
[ ! ]Aluminum Frames, The recommended heat resistance temperature is 70°C. Continuous exposure to temperatures above 100°C will causebending due to the load.
However, temporary high temperatures such as steam can tolerate up to 100°C.

Alterations of Aluminum Frames (Specified Length Only, Fixed Length Not Possible)

[ ! ]Aluminum Frames, By using the various alterations listed below, MISUMI's specified length aluminum frames can be assembled with greaterflexibility.
Some frames cannot be applied depending on the type and size. Please check the price list on each alteration page tosee if it is applicable.
Aluminum Frames, Items marked with "-" in the price list cannot be applied.

classification	Additional Work name	Alteration code example	Content
End face tapping	End face tap (center hole)	LTP/RTP/TPW LHP/RHP/HPW	The frame is tapped. 　LTP/RTP/TPW: M12 depth 36mm 　LHP/RHP/HPW: M8 depth 15mm (with helical insert inserted) Aluminum Frames, This processing is required for blind joints ( screw joints / simple joints ).
Change cutting method	High-precision cutting	SC	Aluminum Frames, The tolerance of the overall length L has been changed from L±0.5 to L±0.2, allowing for high-precision cutting. *Only applicable to L≦1500
Change cutting method	45 degree cut	L□T45 R□T45	Aluminum Frames, The cut is made at a 45-degree angle. 45-degree cuts cannot be specified in the same direction with other alterations. Example: HFS6-3030-500- L TP- LAT45 ⇒ ✖ (alterations in the same direction (left)) HFS6-3030-500- L TP- RAT45 ⇒ 〇 (separate alterations on left and right) [ ! ]If you would like to cut at an angle other than 45 degrees, please contact our catalog non-standard product service .
Wrench Drilling	Fixed position wrench hole	LCH/LCV/LCP RCH/RCV/RCP	Aluminum Frames, This additional processing is required to drill a wrench hole (φ8) in accordance with the position of the tap onthe end face of the mating frame when fastening a blind joint that assembles frames into an L shape. Blind joints that require this processing ( screw joints / single joints / tapping joints )
	Hole position shifted by the thickness of the frame cap	FL FR	Aluminum Frames, The hole position for the additional fixed position wrench hole is moved by the thickness of the frame cap (3mm). This prevents the frame cap from protruding when assembled at a corner.
	Wrench holes at specified positions	AH/BH/CH/DH/EH AV/BV/CV/DV/EV AP/BP/CP/DP/EP	Aluminum Frames, This is an additional process to drill a wrench hole (φ8) at any position. It can be used when fastening blindjoints at locations other than the frame end. ・ Up to five holes can be drilled in each of the horizontal, vertical, and cross directions. [!] If you require six or more wrench holes, please contact our catalog non-standard product service .
Counterbore Drilling	Specified position counterbored hole	Z8-XA○○ Z12-YA○○	Aluminum Frames, This is an additional process to drill a counterbore hole (select from Z6, Z8, or Z12) at any position. 　Z6: Through hole φ6.5, counterbore φ11, Z8: Through hole φ9, counterbore φ14, Z12: Through hole φ13,counterbore φ19 . Up to five holes can be drilled in one direction. For frames with multiple rows of grooves on one surface, counterbore holes will be machined in all grooves. [ ! ]Aluminum Frames, If you require more than six counterbore holes or to change the direction of the counterbore holes, please contact our non-standard product service .
Drilling holes specifically for blind joints	D hole	LDH/LDV RDH/RDV	Drill the holes required for fastening a single joint. ( Single joint )
	S hole	LSH/LSV RSH/RSV	Drills holes required for fastening first-in-place double joints ( first-in-place double joints ) .
	M hole	LMH/LMV RMH/RMV	Drills holes required for connecting post-assembly double joints and center joints. ( Post-assembly double joints / center joints )
	L hole	JLP○○-H△ KLP○○-H△	Drill holes required for connecting parallel joints. ( Parallel joints )
Other processing	GFS series end face tap	LTS/RTS/TSW	Aluminum Frames, We perform the tapping required to attach end plates specifically for high-rigidity frames. ( High-rigidity plates )
	C-chamfered end	CW	Aluminum Frames, The outer periphery of the frame end face is chamfered.
	Sticking stickers	ZZZ	A sticker printed with the catalog number etc. is attached to the aluminum frame. Aluminum Frames, There are restrictions on the number of characters etc., but it is also possible to print the customer's serialnumber and unit number.

8 Series Related Parts of Aluminum Frames

■Aluminum Frames accessories

Product name	bracket	Blind Joint	nut	Frame cap	Groove cover	Conductive washer
photograph
Product page	Here	Here	Here	Here	Here	Here

■Aluminum Frames, List of compatible frame caps

Frame model number	Compatible frame caps
Frame model number	Product Type		color	Thickness	Model number	Number of uses
HFS8-4080 HFSB8-4080 HFSY8-4080 CAF8-4080 EFS8-4080 EFSB8-4080 HFSL8-4080 HFSLB8-4080 Aluminum Frames, Fixed length frames (model numbers starting with K) are also the same.		Cap stopper	black	3	HFC8-4080-B	1
		Cap stopper	Light gray	3	HFC8-4080-S	1
		Cap stopper (long leg type)	black	3	HFCL8-4080-B	1
		Cap stopper (long leg type)	Light gray	3	HFCL8-4080-S	1
		Cap stopper (long leg type)	black	3	HFCB8-4080-B	1
		Cap stopper (long leg type)	Light gray	3	HFCB8-4080-S	1
		bolted	black	3	HFCB8-4040-B	2
			Light gray	3	HFCB8-4040-S	2
			yellow	3	HFCB8-4040-Y	2

Selection Support Information of Aluminum Frames

■Frame connection methods oof Aluminum Frames
Frame connection methods can be broadly divided into the following two types.

	bracket	Blind Joint
Connection example
Features	- Connects outside the frame - Can be moved to any position - Not aesthetically pleasing	・Connects inside the frame ・Aesthetically pleasing ・Requires processing of the frame

■Aluminum Frames, Additional tapping of end faces (8 series 40 x 80)
　Center part (2 holes) (no corner parts)

Size and Position	left	Right side	both sides	cross section
M12 depth 36	LTP	RTP	TPW
M8 depth 15 (helisert inserted)	LHP	RHP	HPW
Tap position

■How to think about the allowable guideline load (deflection) for Aluminum Frames
[!]Aluminum Frames, The allowable guideline load is the load that causes the frame to deflect within 1 mm per 1000 mm of length.
Deflection exceeding this will not cause damage, but it should be considered the maximum practical deflection.(The allowable guideline deflection is proportional to the length. For example, 500 mm = 0.5 mm, 2000 mm = 2 mm.)Please refer to
the Aluminum Frames strength guideline table or the simplified deflection calculation table/deflection calculation formula for your reference.

Type Overview of Aluminum Frames

		Standard Aluminum Frames			Lightweight Aluminum Frames		High-rigidity Aluminum Frames
		HFS Type	EFS type	NFS (NEFS) type	HFSL type	NFSL type	GFS type	GNFS type

Cross-sectional photo
Material		A6005CSS-T5	A6005CSS-T5	A6063S-T5	A6005CSS-T5	A6063S-T5	A6061SS-T6 equivalent	A6063S-T6 equivalent
Features		Standard cross-sectional shape.	Aluminum Frames, This frame maintains the same rigidity as the HFS series while achieving lighter weight and lower cost.	A significant price reduction has been achieved by changing the material. Strength (*) is the same as the HFSand EFS series.	Aluminum Frames, This frame is designed to be lightweight and inexpensive. It is suitable for situations where lightweight andinexpensiveness are prioritized over strength.	By changing the material from HFSL, we have achieved a further price reduction. Strength (*) is the same asthe HFSL series.	Aluminum Frames, A thick frame that is designed for high rigidity, suitable for enclosures that are subject to highloads.	A significant price reduction has been achieved by changing the material of the load-bearing and rigid frame.Strength (*) is the same as the GFS series.
Surface Treatment		White anodized , black anodized , clear coated , baked finish (yellow)	White anodized aluminum Black anodized aluminum	White anodized aluminum Black anodized aluminum	White anodized aluminum Black anodized aluminum	White anodized aluminum	White anodized aluminum	White anodized aluminum
Compatible Series	5	○	-	○	-	-	-	-
	6		○		○	○	○	○
	8
	8-45

Color Image of Aluminum Frames

	White anodized aluminum	Clear coating (glossy)	Black anodized aluminum	Baked finish (yellow)
End face photo

[ ! ]Aluminum Frames, The color is for illustration purposes only.
[ ! ] There is no anodizing or painting on either end.
[ ! ]Aluminum Frames, The clear coating is a transparent coating applied over white anodizing. The surface has a glossy finish.
[ ! ]There are no color numbers or color standards for black anodizing and white anodizing.

Related Products of Aluminum Frames

Product name	General-purpose area sensor	Ultra-thin area sensor
photograph Aluminum Frames
Product page	Here	Here
General information page	Details page	Details page